The ZY-LLJLY-100 series flow recorder is a high-speed and high-performance microprocessor with a 5.6-inch monochrome LCD display screen, which can monitor, control, and record various signals such as temperature, pressure, flow, and electricity on site.
The ZY-LLJLY-100 series flow recorder can freely configure input signals such as standard current, standard voltage, thermocouple, thermistor, frequency, etc. It can be used for sensor distribution and relay alarm output, and can exchange data with the upper computer through USB or communication methods. The paperless recorder itself has real-time data display screen, curve display screen, and bar chart data display screen. At the same time, it can be connected to a micro printer to achieve on-site printing function, and connected to an audible and visual alarm to achieve on-site audible and visual alarm function.
The ZY-LLJLY-100 series flow recorder is a signal input that can record all on-site signals such as temperature, temperature and humidity, current, voltage, pressure, flow rate, liquid level, etc.
The ZY-LLJLY-100 series flow recorder is currently mainly used in various industrial fields such as metallurgy, petroleum, chemical, building materials, papermaking, food, pharmaceuticals, heat treatment, water treatment, etc. It is a new generation of economical and practical paperless recorders that replace traditional recorders.
The combination of recorder and on-site instruments:
1. Install a flow meter to measure and record on-site flow signals.
2. Equipped with a pressure transmitter to measure and record pressure signals on site.
3. Equipped with temperature sensors to measure and record temperature signals on site.
4. Distribution quantity transmitter, capable of measuring and recording on-site electrical signals.
5. Equipped with a liquid level transmitter to measure and record on-site liquid level signals.
6. Install a temperature and humidity transmitter to measure and record temperature and humidity signals on site.
7. ……
The instrument operation interface displays:
The upper computer software operation interface displays:
Number of channels |
1-16 options available |
|
Input signal |
Type II standard signal: (0~10)mA、(0~5)V、0–20mV、0–100mV。 Type III standard signal: (4~20)mA、(1~5)V。 Thermocouples: B, E, J, K, S, T, R, N F1、F2、WRE。 Thermal resistance: Pt100、Cu50、BA1、BA2。 |
|
Accuracy |
±0.2%FS |
|
Input impedance |
The standard current signal input is 250 Ω. Other signal inputs are greater than 20M Ω. |
|
Isolation |
The isolation voltage between channels and ground is greater than 500VAC, fully isolated type, and the isolation voltage between channels is greater than 250VAC. |
|
Power supply |
AC power supply voltage: (100~240)VAC; Frequency: (47~63)Hz; Power consumption: 30VA; |
|
ALARM IN |
250VAC, 3A relay normally open contact |
|
Dielectric Strength |
The insulation strength of the power supply to ground is greater than 1500 VAC, with a leakage current of 10mA for 1 minute; The insulation strength of the power supply to the casing is greater than 1500 VAC, with a leakage current of 10mA for 1 minute. |
|
Watchdog |
Integrate WATCHDOG chip to ensure long-term reliable operation of the host. |
|
Real Time Clock |
Adopting hardware real-time clock, powered by lithium battery after power failure, with clock error of ± 1 minute/month. |
|
Power failure protection |
All data is stored in FLASH memory without the need for backup batteries, ensuring that all historical data and configuration parameters are not lost due to power failure. |
|
communication interface |
Two communication interfaces, RS-485 and RS-232C, are provided for users to choose from, but they cannot be used simultaneously. The RS-485 serial bus is isolated from the host |
|
sampling period |
1 second, which means sampling each channel once per second |
|
Record |
1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 4 minutes can be set |
|
Display |
3-inch LCD display screen |
|
Size |
External dimensions: 144mm × 144mm × 220mm, opening size: 138+1mm × 138+1mM |