ZXcm-500 Pb Total Lead Water Quality Online Analyzer-Fornitore globale

Building A1, Area A, Optics Valley Core Center, No. 52 Liufang Avenue, Donghu New Technology Development Zone, Wuhan City, Hubei Province

1、 Product Overview

The ZXcm-500 Pb total lead water quality online analyzer uses zinc reagent spectrophotometry for measurement, with a unique design that reduces environmental interference and equipment failure.

IIProduct Features

Adopting a digestion colorimetric integrated design, it avoids additional measurement errors introduced by sample circulation after color development

Sealed digestion, guaranteed pressure inside the tube, explosion-proof design, to avoid liquid splashing outside

Equipped with intelligent fault self diagnosis function, alarm prompt, and convenient instrument management and maintenance, the optimized design reduces reagent consumption

The new metrology system, optical quantitative sample/reagent, fundamentally improves the quantitative accuracy

Powerful external interface function and remote upgrade function

The good scalability of the instrument enables the addition of device functions according to user needs.

Adopting a high-resolution touch screen, it is easy to operate, rich in information, and records can be saved and queried without loss when powered off.

3、 System Overview

The unique design enables this product to have lower failure rates, lower maintenance requirements, lower reagent consumption, and higher cost-effectiveness compared to similar products.

1. Select valve components: Choose reagent sampling timing, flexible and diverse channels, versatile functions, with the advantages of minimum dead volume, easy maintenance, and high lifespan.

2. Micro metering components: reagent adjustment and metering are achieved through a visual photoelectric system, overcoming quantitative errors caused by wear of peristaltic pump tubes; At the same time, the adjustment and quantification of trace reagents have been achieved, with each dose being only 1 milliliter, greatly reducing the amount of reagents used.

3. Sample injection component: Peristaltic pump negative pressure suction, there is always an air buffer zone between the reagent and the pump tube to avoid corrosion of the pump tube; At the same time, it makes the mixing of reagents more concise and flexible.

4 Micro and Large Ratio Measurement Components: While ensuring the accurate measurement of small measuring reagents, it also solves the problem of large ratios between different reagents, greatly improving the accuracy of analytical equipment.

5 Reagent tubes: Imported modified polytetrafluoroethylene transparent hose with a diameter greater than 1.5mm is used to reduce the probability of particle blockage in water samples.