VIP member
Product details
ZX centrifugal self-priming pump
1、 ZX Centrifugal Self priming Pump Product Overview:
ZX type self-priming centrifugal pump for clean waterIt is an energy-saving pump product developed by our company based on advanced foreign technology. It has the characteristics of compact structure, easy operation, stable operation, simple maintenance, high efficiency, long service life, and strong self-priming ability. There is no need to install a bottom valve in the pipeline of this pump. Before operation, it is only necessary to ensure that a certain amount of liquid is stored in the pump body, which simplifies the pipeline system and improves working conditions.
2、 Application scope of ZX centrifugal self-priming pump:
1. Suitable for urban environmental protection, constructionfire fighting、chemical industryPharmaceuticals, dyes, printing and dyeing, brewing, electricity, electroplating, papermaking, petroleum, mining, equipment cooling, oil tanker unloading, etc.
2. Suitable for clear water, seawater, chemical media liquids with acid and alkalinity, and slurries with general paste like properties (medium viscosity ≤ 100 cP, solid content up to 30% or less).
3. Equipped with a rocker nozzle, the water can be washed into the air and dispersed into small raindrops for spray. It is a good machine for farms, nurseries, orchards and tea gardens.
4. It can be used in conjunction with any type and specification of filter press, and is the most ideal pump for delivering slurry to the filter press for pressure filtration.
3、 ZX centrifugationself priming pumpModel meaning:
50 ZX 12.5-50 PB
50- Suction port diameter (mm)
ZX - Self priming pump
12.5- Rated flow rate (m3/h)
50- Rated head (m)
P - Stainless steel material
B - Explosion proof motor
4、 ZX centrifugal self-priming pumpTechnical parameters:
Flow rate: 3-280m3/h;
Head: 12-80m;
Motor power: 1.5-90kw;
Speed: 1450, 2900r/min;
Caliber: 32-200mm;
Medium temperature: ≤ 80℃；
Self suction height: 3.5-4.5m.
__________________________________________________________________
Tip 1: Try to shorten the length of the suction pipe and install fewer elbows, which is beneficial for improving self-priming performance.
Tip 2: When using a self-priming pump for the first time, it is still necessary to fill the pump chamber with liquid.
Tip 3: After 3000 hours of regular operation, the water pump needs to be disassembled, inspected, and maintained. If necessary, vulnerable parts that are no longer suitable for use should be replaced.
Tip 4: This pump can be customized with a direct connection type, which has high concentricity, enhanced stability, and is more economical. However, maintenance may be a bit troublesome.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-