The ZRN507 torque sensor is one of the ZRN series torque sensors with a soft and small size (please call for specific dimensions).

The ZRN507 torque sensor is improved by referencing foreign products. The product has a more compact appearance

The line processing is more reasonable and can output standard analog signals, making it more suitable for the needs of domestic customers,

At the same time, it also takes into account the excellent quality of foreign products, making it a good substitute for foreign products.

The ZRN507 series torque sensor is equipped with:

1. Torque measurement function; Energy and signal non-contact transmission function; Digitization function of output signal.

2. It can transmit static torque signals, rotational torque signals, dynamic torque signals, and static torque signals.

3. When transmitting signals, it is independent of whether there is rotation, speed, and direction. Can adapt to long-term, high-speed operation.

4. High precision and good stability; 5. Small size, light weight, easy to install;

6. Continuous transmission of forward and reverse torque signals without the need for repeated zeroing;

7. Without wear parts such as collector rings, it can operate at high speed for a long time;

8. Strong anti-interference ability;

9. Can be installed in any position and direction;

2、 Technical indicators

1. Range: 10, 50, 100, 200, 500, 1000N · m

2. Accuracy: 0.5% F · S

3. Suitable for speeds below 20000 revolutions per minute

4. Environmental temperature: 0 ℃ -50 ℃

5. Frequency response: 100 μ s

6. Self weight=0.8kg-2 Kg

7. Output signal: 0-12v square wave frequency load current<10mA; 4-20mA, 1-5V, 0-5V, 0-10V

This series of torque sensors is powered by electromagnetic coupling non-contact wireless induction and can work for a long time. It is widely used for torque monitoring of motors, generators, reducers, and diesel engines.

If it is necessary to measure the speed, simply install a dedicated speed sensor and its speed wheel on the housing of this series of torque sensors to measure the speed signal of 6-60 square waves per revolution.

1. Use two sets of couplings to install the sensor with torque sensor between the power source and the load.

2. It is recommended to use flexibility Elastic or universal joint coupling to ensure concentricity ∠ 0.1mm

3. Power and load equipment must be fixed and reliable to avoid vibration.

4. Use flexible fixation (able to swing) between the base of this torque sensor and the base of the equipment as much as possible to avoid generating bending moments.

3、 Signal processing

1. Use ZRN series torque meter to directly display torque values;

2. Directly send the torque frequency signal to the computer or PLD for processing;

3. Convert to 4-20mA or 1-5V analog signal

4、 Usage precautions:

1. The wiring must be correct;

2. Range of ± 15V: not less than ± 14.5V and not more than ± 15.5V;

3. The signal line output shall not be short circuited to ground or power supply, and the output current shall not exceed 10mA;

4. The shielding layer of the shielded cable must be connected to the common terminal (power ground) of the ± 15V power supply.

5. If you have any questions during use, please contact our company in a timely manner. It is not allowed to disassemble it by yourself during the warranty period.