The design and manufacturing of a 60kV/200mA water-cooled DC high-voltage generator is specifically designed for leakage current and DC withstand voltage testing of water-cooled generators. The guiding principles for the design and manufacturing are as follows:

1. Due to the large conducted current in the windings of large water-cooled generators, it varies from 20-150mA under test voltage. If there is no DC high-voltage generator with sufficient capacity, it is impossible to boost the voltage.

2. At present, the output current of domestic DC high-voltage testers is generally within 10mA, and high-voltage generators with an output current of 200mA are considered blank.

3. For general high-voltage electrical equipment, DC testing can detect insulation penetration defects, while for motors, it can detect local insulation defects (insulation at the end of the stator coil), which cannot be replaced by other tests.

4. In order to accurately measure the leakage current of the water-cooled generator set, the 60kV/200mA series water-cooled DC high-voltage generator is specially designed with compensation circuits for various interference currents. During the test, the interference of stray currents and polarization potential of the water collection pipe can be completely eliminated, and the current of the test sample can be truly measured.

The 60kV/200mA series water-cooled DC high-voltage generator adopts an intermediate frequency voltage doubling circuit. Apply new PWM pulse width modulation technology and high-power IGBT devices. And according to the theory of electromagnetic compatibility, special shielding, isolation, and grounding measures are adopted. The water-cooled DC high-voltage generator has achieved high quality, portability, and the ability to withstand rated voltage discharge without damage.

Product nickname: High Voltage Generator, High Voltage Generator, Medium Frequency DC High Voltage Generator