VIP member
YD-120P Professional Powder Metallurgy Density Tester
We still have 600g, 1200g, and 2000g. The following three products are widely sold and are suitable for the powder metallurgy industry. Gear parts, ir
Product details
We still have600g 1200g 2000g The following three are the ones that sell more
Applicable toThe powder metallurgy industry can quickly measure irregularly shaped gear parts, both raw and cooked
The following two powder metallurgy density scales belong to fast measurement powder metallurgy parts density scales that only take a few seconds
To measure product density and weight, it is recommended to weigh 5 grams or more. If it is relatively light, please purchase high-precision product DX-120P
This product can also measure the oil content in powder metallurgy
Principle:According to ASTM B311 and B328; MPIF Standard 42、57； JIS Z2505、 Z2506； GB/T5163 is applicable to wax sealing methodMeasurement by vacuum saturation method,
Using Archimedes' principle buoyancy method, accurately read the measured values directly.
-
Model: DX-120P DX-300PM Weighing accuracy: 0.001g 0.001g 最大称重： 120g 300g Measurement time: About 10 seconds Density analysis: 0.0001g/cm3 Measurement type: Irregular raw and cooked embryos of gear parts with irregular shapes Setting function: Temperature compensation setting, solution compensation setting, saturated oil method Measurement function: Bulk density, wet density, (apparent porosity, water absorption, total porosity) 0.1% (open volume, closed volume) 0.001cm3 Optional: Printer vacuum extractor Packaging size; (Length, Width, Height) 45*24*46mm Weight; (Gross weight) 7.5kg -
The video is being updated ........
-
Functional characteristics and devices:
1. No manual calculation required, fully automated data measurement. Easy to operate;
2. Support one click automatic reset and deduction of auxiliary accessory weight operation;
3. One device can complete 7 types of data measurements
4. Adopting gold-plated ceramic sensors, it has the characteristics of long corrosion resistance, long service life, and low failure rate
5. Adopting an integrated transparent measuring sink, the size of the integrated sink is (165 * 115 * 856) mm
6. Adopting a lightweight, thin strip, stainless steel suspension rail design can greatly reduce errors caused by the buoyancy of the suspension rail line;
7. Equipment appearance dimensions; (27 * 27 * 27) mm net weight; 4.5kg
8. Equipped with RS-232 standard interface, this specific gravity meter can be easily connected to computers and printers
※ target, aim at, address, focus on, in response toWe have small samplesprovide0.1mgWith a high-precision measuring instrument of 0.01mg,Welcomenegotiateinquire
① Host, ② sink, ③ measuring table, ④ tweezers, ⑤ instruction manual, ⑥ weights, ⑦ windproof and dustproof cover, ⑧ one set of particle measuring accessories, ⑨ one set of float measuring accessories, ⑩ one power transformer -
Powder metallurgy bulk density testerOperation steps:
① Place the sample to be tested indensimeterOn the measuring table, after stabilizing, press the "Memory" button to memorize the empty weight (weight in the air).
② After oil treatment, place the sample on the measuring table and press the "Memory" button to memorize the empty weight after stabilization.
③ Place the sample in water, stabilize it, and press the "Memory" button to remember the weight of the water (the weight of the sample in water), which will directly display the density of the sample. Press the "F" key to switch values, and display density, porosity, wet density, and volume in sequence. -
- One year free warranty, lifetime maintenance;
- 7-day no reason return and exchange, 24-hour instant response;
- One on one technical guidance, allowing you to have no worries after purchasing;
- National free consultation hotline: 18659285958.
-
| Download Materials | Update Date |
 YD-120P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
| Instruction manual download | Update Date |
|
YD-120P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
| Color page download | Update Date |
|
YD-120P Professional Powder Metallurgy Density Tester
|
2015-08-20 |
-
-
Option 1: Customer ------->Business Manager ------->Contract Signing ------->Payment on Delivery ------->Corporate Transfer ------->Warehouse Shipment ------->Confirm Receipt ------->Our Company Invoices
Option 2: Customer ------->Business Manager ------->Contract Signing ------->Cash on Delivery ------->Warehouse Shipment ------->Express Collection ------->Confirm Receipt ------->Our Company Invoices
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-