XSW single channel display instrument

XSW Product Overview

• 0.2 level accuracy, measurement and control speed of 10 times per second, display range -1999 to 9999.

  Double four digit digital display (main display+second display), where the second display can display information such as engineering units.

  Universal input, selected through settings.

• Optional 1-4 point alarm output. It includes five basic alarm modes: upper limit of measurement value, lower limit of measurement value, upper limit of deviation, lower limit of deviation, and absolute value of deviation, as well as five standby alarm modes corresponding to the five basic alarm modes. (Standby alarm mode: Refers to the situation where the instrument does not alarm even when it is in the alarm zone when powered on. When the measured value enters the non alarm zone, a standby condition is established and normal alarm is triggered thereafter.).

• 10 segment line correction function.

• Peak and valley value acquisition function.

• Optional communication and transmission.

  XSW selection specifications

  content	Code Description
  	XSW-	Dual 4-digit LED display, analog universal input, 0.2 level display accuracy, 10 measurement and control speeds per second;
  shape size		AH	160Horizontal hole size: 152 × 76, with dimensions of 80 × 125mm
  		AS	80Vertical hole size of 160 × 125mm: 152 × 76
  		B	96Hole size: 92 × 92, with dimensions of 96 × 76mm
  		CH	9648 × 82mm horizontal opening size: 92 × 45
  		CS	48Vertical hole size of 96 × 82mm: 92 × 45
  		D	72Hole size: 68 × 68, with dimensions of 72 × 75mm
  		E	4848 × 108mm hole size: 45.5 × 45.5
  call the police(Optional) (250V AC/3A, resistive load)			Limit A	T1～T4	1The 4-point alarm relay outputs are both normally open and normally closed dual contacts
  			Limit B	T1～T2	1~2-point alarm relay output, both with normally open and normally closed dual contacts
  				T3～T4	3The 4-point alarm relay outputs are all single normally open contacts
  			Limit C	T1～T2	1~2-point alarm relay output, both with normally open and normally closed dual contacts
  				T3	3Point alarm relay output, all with single normally open contacts
  				T4	4Point alarm relay output, the first 3 points are single normally open contacts, and the fourth point is a double contact of normally open and normally closed. When selecting this model, external power supply cannot be selected;
  			Limit D	T1～T2	12-point alarm relay output, 1-point normally open+normally closed dual contact; 1 point normally open contact
  				T3	3Point alarm relay output, point 1 is a normally open+normally closed dual contact, and the other 2 points are single normally open contacts. When selecting this model, external power supply cannot be selected;
  			Limit E	T1～T2	1~2-point alarm relay output, 1-point normally open+normally closed contact, and 1-point normally open contact
  External power supply(Optional)					B1	24V± 5% below 50mA
  					B2	12V±5% 50mAbelow
  Transducer(Optional) (Resolution: 1/3000; Load Capacity: 600 Ω);communication(Optional) (Optional through parameters: Modbus RTU or TC-ASCII protocol) (Communication address: 0-99) See details:Note ①						A1	Current output: (4-20) mA, (0-10) mA, (0-20) mA.
  						A2	Voltage output (1-5) V, (0-5) V
  						A3	Voltage output (0-10) V
  						MS1	RS232interface(AH, AS, B sizes only)
  						MS2	RS485interface
  Power specifications							V0	100～240V AC 50/60 Hz
  							V1	10～24V AC 50/60 Hz； 10～24V DC