What is stainless steel spiral duct? On this spiral duct, each choice should be based on the length of the connecting pipe to see if it can seal the duct. And the choice of metal material and installation should be based on the connection interface between pipes. And for the device chosen to be used on this production line, if the selected air volume is relatively large, use this spiral air duct. So what is the length of the circular air duct in this spiral duct, as well as the length of the rectangle, and we also need to check the connecting ground joint.

In addition, in terms of this loss, it is also necessary to consider how much space is left for a rectangular duct with a diameter longer than a circular duct and an aspect ratio of 1:2 under the same cross-sectional conditions. How much space is left for a 1:3 ratio and how much space is left for a 1:4 ratio. In terms of the actual insulation effect, compared with rectangular ducts, circular ducts can use thinner insulation materials. Insulation layers with lower relative density can also be applied.

The total number and specifications of installation suspension brackets can be reduced. The spacing between the fixed brackets for rectangular air ducts is 2.5C, while for circular air ducts it is 3M. The excellent structural characteristics of circular air ducts allow for the use of thinner metal sheet laser processing under the same conditions. The software for the piping system of circular ducts is standardized, and due to the standardization of specifications, the pipes and connectors of the detailed series of products can be pre made. The connection of circular ducts is simple, and installing a circular duct only requires one person, while rectangular ducts require at least two people. The friction loss of circular ducts is smaller than that of rectangular ducts. It is due to the significantly reduced cyclone friction resistance and high aspect ratio sealing of circular ducts and spare parts. Therefore, when selecting a centrifugal fan, the motor output power of the supporting facilities is significantly reduced, thereby reducing the usual operating costs of the system software and the one-time project investment assets of the centrifugal fan.

Stainless steel ducts, as one of the essential components in modern construction, are required for both commercial and residential purposes to be equipped with ventilation ducts to purify indoor air. So, let's talk about the performance comparison between their types below:

Among the types of products, some ventilation ducts are used to extract oil fumes. So there is still residual temperature inside the air duct that can be utilized. Future products can be equipped with waste heat boilers, heat pipe heat exchangers, and other residual heat devices in the system to generate steam, hot water, and hot air, in order to effectively utilize the waste heat from the ventilation system and improve the power output of the system. Expand reading on 'Where to buy a centrifugal fan in Liaoyang'

Nowadays, the air volume of stainless steel ducts is fixed with engine power selection. In the future, ducts can be planned with variable smoke volume and various speed control devices can be selected to save power and reduce the operating costs of ventilation systems.

In some factories, dust and other pollution may occur during the production process. In order to purify the workshop and create a healthy environment for workers, air ducts are also installed in the factory equipment. Low maintenance cost, suitable for flexible and easy to implement stainless steel duct usage technology. What is stainless steel spiral duct? If you have any questions about the air duct, please contact customer service directly.