The operating procedures for hydraulic press are as follows. Please carefully understand them by the manufacturer

1. Hydraulic press operators must undergo training to master equipment performance and operating techniques before they can operate independently.

2. Before starting the homework, all kinds of debris on the mold should be cleaned first, and any dirt on the hydraulic press rod should be wiped clean.

3. The installation of hydraulic press molds must be carried out under power-off conditions, and it is forbidden to collide with the start button, handle, or use foot pedals on the foot switch.

4. Assemble the upper and lower molds for centering, adjust the mold clearance, and do not allow unilateral deviation from the center. After confirmation, press the mold again.

5. Before starting the hydraulic press, start the equipment and let it idle for 5 minutes. At the same time, check whether the oil level in the oil tank is sufficient, whether the oil pump sound is normal, and whether there are any leaks in the hydraulic unit, pipelines, joints, and pistons. Shenzhen Hydraulic Press TM Series Introduction

6. Start the equipment for pressure testing, check if the pressure reaches the working pressure, if the equipment operates normally and reliably, and if there are any leaks.

7. Adjust the work pressure, but it should not exceed 90% of the rated pressure of the equipment. Test one workpiece and produce it after passing the inspection.

8. For different hydraulic press profiles and workpieces, during press fitting and calibration, the working pressure, pressure application, holding frequency and time of the press should be adjusted at any time, and it should be ensured that the mold and workpiece are not damaged.

9. It is strictly prohibited to insert hands and heads into the working parts of the pressing plate and mold when the body pressing plate slides up and down.

10. It is strictly prohibited to strike, stretch, weld, cut, bend, twist or perform other operations on the work while applying pressure.

11. Smoking, welding, cutting, and hot work are not allowed around the hydraulic press, and flammable and explosive materials are not allowed to be stored. Take fire prevention measures.

12. After the hydraulic press is completed, the power should be cut off, the hydraulic rod of the press should be wiped clean, lubricating oil should be added, the mold and workpiece should be cleaned, and placed neatly

After sales service principle: The product warranty period is 12 months. During the warranty period, the supplier will provide free repair and replacement of parts damaged due to quality reasons. For parts damaged outside the warranty period, only the cost fee will be charged for the provided parts. For equipment damage caused by human factors of the purchaser, the supplier's repair or provided parts will be calculated at cost price.

1、 We strictly adhere to international quality system certification standards to standardize our product design, manufacturing, installation, and after-sales service behavior. With our sincerity, enthusiasm, persistence, and pursuit, we wholeheartedly dedicate ourselves to providing customers with the best equipment configuration solutions, first-class product quality, and thoughtful installation and maintenance services.

2、 To facilitate timely transmission of installation and maintenance information to customers, the after-sales service hotline of Tengzhou Man'er Electromechanical Equipment Factory is toll free nationwide at 1345505348115965114172. We welcome after-sales service inquiries at any time.

3、 To ensure timely arrival at the installation and maintenance site, our company has established a complete and fully functional intensive sales and after-sales service network. We guarantee to relieve your worries in the shortest possible time.

4、 Our company's after-sales service for sold products: free on-site repair within one year (excluding human factors). Note: Please strictly follow the instructions for use, and even precision machine tools require your careful maintenance. In case of equipment malfunction that affects usage, we guarantee a phone response within 3 hours. If the issue cannot be resolved over the phone, we will arrive at the user's site for repair within 48 hours.

5、 We warmly welcome new and old customers, with the belief of one cooperation and lifelong friendship. We regularly provide us with improvement plans and suggestions in product design, product quality, and after-sales service.

The above after-sales service commitments, we will definitely keep our promises, and we will act on our words and achieve results. We will work together with our customers to create a win-win situation!