VMC650 machining center parameters:

Main configuration of 650 machining center:

1. Resin sand casting, three wire rail (or configured with two wire one hard/three hard rail according to customer requirements).
2. Three axis roller track (Taiwan Shangyin).
3. Precise locking nut (Taiwan Yingxi).
4. Taiwan produced spindles (Taiwan Luo Yi, Taiwan Jian Chun, Taiwan Dan Quan)
5. Taiwan made turbocharged cylinder (Shangpin).
6. Imported bearings (NSK from Japan, FAG from Germany).
7. Domestic high-quality couplings.
8. X, Y, Z (bottom) stainless steel guide rail protection.
9. Imported electronic lubrication pump (Kawachi, Japan).
10. Domestic cooling system includes water pump and water tank.
11. Pneumatic components (Yadeke).
12. Optional: Automatic spiral chip removal function.
13. System brand options: FANUC、 Guangshu, Siemens, Kandi, Mitsubishi.
14. Disc type knife magazine BT40-T24 (Okada, Taiwan).
15. Equipped with spindle oil cooling function and central air blowing.
16. Intermediate relay: SCHNETDER
VMC650 machining center selection configuration

1. The main foundation components such as the base, slide, worktable, column, and spindle box are made of HT300 cast iron; The base and slide are both box type structures, and the compact and reasonable symmetrical reinforcement structure ensures the high rigidity and bending and shock absorption performance of the foundation components; The grid like reinforcement inside the column effectively ensures the rigidity and accuracy during strong cutting of the Z-axis; The basic components are molded with resin sand and undergo aging treatment, providing stability for the long-term performance of the machine tool.
2 X. The Y-axis guide rail is a high rigidity rolling linear guide rail, which is equipped with automatic forced lubrication. The friction resistance of the movement is extremely small, and there is no low-speed crawling phenomenon. The machine tool has a high precision and service life. The Z-axis adopts a linear sliding guide rail with good rigidity;
3 The Z-direction drive motor has a power-off braking device;
4 X. The Y and Z directions are fed using high-precision and high-strength internal circulation double nut preloaded ball screws with high feed speed; The drive motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw without backlash, ensuring the positioning accuracy and synchronization of the machine tool;
5. Adopting high-speed, high-precision, and high rigidity spindle units, with strong axial and radial bearing capacity, and a maximum speed of up to 8000rpm;
6 X. The Y and Z direction guide rails and lead screws are equipped with fully enclosed protective devices to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy and service life of the machine tool;
7. The external protection of the machine tool adopts a fully protective structure design, which is easy to operate, safe and reliable;
8. Using a reliable centralized automatic lubrication device, automatic intermittent lubrication is applied to each lubrication point of the machine tool in a timed and quantitative manner, and the lubrication time can be adjusted according to the working conditions;
9. Using 8 conical hat style knife magazines produced by professional manufacturers in Taiwan, the tool changing is accurate and efficient. After millions of operation tests, it meets reliability requirements; The knife magazine movement is equipped with a damping structure, which can reduce the impact during movement and ensure the service life of the knife magazine; Pneumatic drive, easy to use, shortest path for tool change;
10. The machine tool operating system adopts ergonomic principles, with an independently designed control box that can rotate on its own and is easy to operate.