1、 Product Features
Adopting Fulaik control valve and Atuzu control valve. Specially designed and customized according to the water quality characteristics of different regions and the usage requirements of users' water systems. The performance price ratio is higher than similar products. Widely applied in various regions with good results.

2、 Application scope
This equipment is widely used in industrial or civilian systems such as boilers, air conditioning, refrigeration, etc. in petrochemicals, light industry and textiles, food hygiene, hotels and restaurants.

3、 Technical parameters
Raw water hardness: ≤ 8 mmol/L
Working environment temperature: 5 ℃ -50 ℃
Water hardness: ≤ 0.03mmol/L
Relative temperature: ≤ 95%（25℃）
Inlet water pressure: 0.2Mpa-0.5Mpa
Power supply: 220V ± 22V/50Hz
Water temperature: 5 ℃ -45 ℃
Resin model: Strong acid cation exchange resin
Free chlorine: ≤ 0.3mg/L
Regeneration control: downstream timing type, quantitative type
Suspended solids: ＜ 5mg/L
Interface form: threaded or ABS flange
Iron content:< 0.3mg/L

4、 Selection instructions
Select equipment model based on actual water usage
When the hardness of the raw water is ≤ 6mmol/L, the larger water production rate listed in the table can be selected.
When the hardness of the raw water is ≤ 8mmol/L, the selection can be based on the smaller water production rate listed in the table.
When the original hardness is ≤ 8mmol/L, it is recommended to use secondary softening.
When the regularity of water usage is strong, time control can be used
When the water usage is irregular and the raw water quality is poor, the flow control method is adopted
The time flow simultaneous control method can also be used, that is, when the softened water volume reaches the set time, regeneration can only be started. When users need to increase the number of regenerations in the state of excessive water consumption, a controller with manual function can be selected.