VMK/VMR is a quick opening and quick closing safety valve, which is a normally closed solenoid valve. In the power-off state, the spring acts on the valve core to prevent the passage of gas. The valve opens when power is supplied to the coil. When the current is cut off, the valve quickly closes.

This device is suitable for the sealing and regulation of air and gas in atmospheric pressure or blast combustion chambers, industrial furnaces, and all equipment using gas solenoid valves (applicable to continuous operating conditions -100% ED).

Technical Parameter

Connection method:

Threaded interface Rp3/8-1/2 (brass)

Threaded interface Rp3/8-1/2-3/4-11/4-11/2-2

Flange interface DN65-DN80-DN100-DN125-DN-150

Rated voltage: 230VAC 50/60Hz 110VAC 50/60Hz 24VAC/DC12VAC/DC

Voltage tolerance: -15% -+10%

Working temperature: -15C -+60C

Work pressure: maximum 200/360mbar

Opening/closing time:<>

Opening/closing time:<>

Protection level: IP54

Cable: PG9

Sealing material: NBR rubber

Valve body material: die cast alloy aluminum

Applicable media: natural gas, liquefied petroleum gas, artificial coal gas, air, etc

Non corrosive gas (EN437 regulation)

Pressure inlet: G1/4 on both sides (excluding brass series)

Call range: on-demand from Rp3/4 to DN150