VIP member
VM1060 hard rail CNC milling machine 1060 mold processing CNC milling machine
CNC milling machine
Product details
VM1060Hard track CNC milling machinecharacteristic:
Mold processing is different from the processing of other products and components, as it requires higher rigidity from CNC milling machines. The first process in mold processing is rough cutting, and the material of the mold is mostly hard, with a large cutting amount. Therefore, it is required that the 1060 machining center is mostly a hard rail or a two line one hard structure. Our company has launched a gearbox spindle CNC milling machine based on the customer's mold processing requirements. The spindle transmission method has been changed from belt transmission to gear transmission, greatly improving the force and cutting force during feeding.
Technical parameters of VM1060 mold processing CNC milling machine:
VM1060 CNC milling machine |
instrument for drawing circlescheck |
||||
Workbench specifications (length x width) |
1200×600mm |
||||
Maximum load capacity of workbench |
1000 kg |
||||
X. Y/Z axis coordinate travel |
1000 *600*600mm |
||||
Distance from the centerline of the spindle to the front guide rail of the column |
675 mm |
||||
Distance from the spindle end face to the flat surface of the worktable |
120～720mm |
||||
X. Y, Z cutting feed rate |
1～6000 mm/min |
||||
X. Y rapid feed speed |
24m/min |
||||
Z rapid feed rate |
17m/min |
||||
Range of spindle speed |
50~8000 r/min |
||||
Spindle taper hole |
BT40 -150mm |
||||
spindle |
11/15KW |
||||
X. Y servo motor |
BISS22/3000 Direct axis |
||||
Z servo motor |
BISS22/3000 Direct axis Z-axis with brake included |
||||
Workbench T-shaped slot (number of slots x slot width x slot spacing) |
5/18/110mm Desktop quenching |
||||
repeatability |
300mm/+ 0.003mm |
||||
positioning accuracy |
300mm/+ 0.005mm |
||||
Numerical Control System |
Japan Fanuc OI-MF Bus absolute value control does not return to zero when turned on High speed and high-precision function |
||||
Use source gas pressure |
0.6-0.8 MPa |
||||
1. |
number control system interconnected system |
1 set |
Original from Fanuc Japan |
||
2. |
Spindle servo motor |
1 set |
Original from Fanuc Japan |
||
3. |
Spindle driver |
1 set |
Original from Fanuc Japan |
||
4. |
X、 Y、 Zservo motor |
Each 1cover |
Original from Fanuc Japan |
||
5. |
X、 Y、 ZDriver |
Each 1cover |
Original from Fanuc Japan |
||
6. |
X. Y and Z-axis screw bearings Ball screw specialized pair bearing |
1 group each |
Japan NSK |
||
7. |
X. Y-axis and Z-axis ball screws 4012 Extended wear-resistant type of silk mother |
1 group each |
Taiwan Court of Justice |
||
8. |
X、 YAxis roller heavy-duty track 45mmEnlarge and widen the sliding seat |
1 group each |
Taiwan Silver/INA |
||
9. |
ZAxis adhesive |
1 cover |
Garrison, USA |
||
10. |
host axle one Yuan BT40-150mm |
1 cover |
Taiwan Jianchun |
||
11. |
Main pneumatic components |
1 group |
AirTAC |
||
12. |
Main electrical components |
1 group |
Schneider, France |
||
13. |
Cutting fluid water pump |
1 set |
Luo Rui |
||
14. |
Automatic lubricating oil pump |
1cover |
Japanese River Valley |
||
15. |
Oil metering components |
1cover |
Japanese River Valley |
||
16. |
Electrical cabinet cold and heat exchanger |
1 set |
Wen Heng |
||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-