Used Shimadzu SPD-M20A diode array detectorIntroduction:
Shimadzu diode detector SPD-M20AThe diode array detector is a new technology developed by Shimadzu Corporation, with a low noise level that is three times higher than the company's previous products. The SPD-M20A diode array detector can perform sensitivity quantitative analysis comparable to conventional UV detectors, greatly changing people's impression of diode array detectors.
_Shimadzu diode detector SPD-M20ATechnical parameters of DAD diode array detector:
1. Light source: deuterium lamp+tungsten lamp;
2. Wavelength range: 190-800nm;
3. Number of diodes: 512;
4. Spectral bandwidth: 1.2nm (high-resolution mode), 8nm (high-sensitivity mode);
5. Wavelength accuracy: 1nm;
6. Wavelength precision: 0.1nm;
7. Noise: 0.3x10-5 AU/(under certain conditions);
8. Drift: 0.5x10-3 AU/h (under conditions);
9. Linear: 2.0AU (ASTM specification);
10. Flow pool: 10mm, 10ul, 12MPa (standard)
11. Function: Contour line output, spectral retrieval, maximum output
Used Shimadzu SPD-M20A diode array detector
SPD-M20A main body
NO | part Number | Component Name |
---|---|---|
1 | 228-34016 | LAMP |
2 | 228-42611-91 | lamp cap |
2-1 | 228-42574 | base |
2-2 | 228-42600 | Lamp cap cover |
2-3 | 228-42601 | nut |
3 | 228-34410-91 | tungsten lamp |
4 | 228-34397 | Tungsten lamp baffle |
5 | 228-42593-41 | Controllable temperature detection pool SPD-M20A |
6 | 228-46363 | Nut (0.8MN-PEEK) |
7 | 228-40998-10 | Connector, 1.6-0.8C |
8 | 228-18565 | Nut (PEEK) |
9 | 228-42566 | Fixed plate |
10 | 037-02820-55 | Adjusting nut N-1 M3 × 14 white |
11 | 228-43040-91 | Right panel, standard configuration |
12 | 228-43200-98 | Panel Component (SPD-20A) |
13 | 228-42932-91 | Light shielding board |
14 | 228-45087 | NS spring clip |
228-37440-44 | 20A detection pool |
NO | part Number | Component Name |
---|---|---|
1 | 228-35097-03 | Pad, 6 × 3 × 0.1 |
2 | 228-14572 | Lens (R4, RD6) |
3 | 228-40239-91 | Lens fixing screw assembly |
4 | 228-18058 | Optical window, pool standard configuration |
5 | 228-37445 | Detecting the lid inside the pool, BK |
6 | 020-12104 | SUS flat head nut M3 × 6 |
7 | 228-38390-91 | Detection pool fixing screw component |
8 | 020-03144 | PA flat nut M3 × 8, WH |
228-40189-91 | heater | |
9 | 228-35097-05 | pad |
※1 | 228-45609-91 | Inlet pipeline component |
※1 | 28-18495-06 | ETFE tube, diameter 1.6 × 0.3 (sold in 1m units) |
※1 | 228-37457 | Nut 1.6MN-S-6, pool side outlet |
※1 | 228-16000-10 | Pressure ring, 1.6F 316L |
10 | 228-24295 | Pad, trace |
11 | 228-40239-92 | Microcell lens fastening nut assembly |
228-35641-91 | Half micro pool inlet pipe | |
12 | 228-31463 | Micro pool inlet pipe |
13 | 228-16000-17 | Pressure ring, 1.6F 3/pkt |
14 | 228-25299 | Long Nut 1.6 |
15 | 228-14616 | Microcell shell |
16 | 023-04160 | Nut SUS # 3 M6 |
17 | 228-35642-91 | Export pipeline |
18 | 228-35090 | Nut 1.6MN-S |
※ 1 Used for standard controllable temperature detection pool