VIP member
Urine iodine determination super water bath
MU-2 Type Urine Iodine Measurement Super Water Bath User Manual 1 Purpose MU-2 Type Urine Iodine Measurement Super Water Bath, Especially Suitable for
Product details
User Manual for MU-2 Urine Iodine Measurement Super Water Bath
1 Purpose
The MU-2 urine iodine measurement super water bath is particularly suitable for constant temperature control of urine iodine measurement.
Suitable for precision constant temperature heating in health, biology, physics, plants, chemical, pharmaceutical, scientific research and other units. Used in conjunction with other measuring instruments.
Figure 1 MU-2 Urine Iodine Measurement Super Water Bath
2. Structural features: Digital display of water temperature. Press the button to set the temperature. The pool has a large opening area and is equipped with four large test tube racks.
The water flow is smooth, fast, and noiseless. Stainless steel water tanks never rust.
3 Technical specifications: Power supply voltage:~220V, 50Hz. Rated power: 750 W
4. Temperature control range: room temperature to 65 ℃. Temperature control accuracy: ± 0.1 ℃.
5 Water tank dimensions: length 745mm x width 373mm x height 300mm
Water tank length 600 mm x width 300 mm x height 150 mm
6 Usage Methods
6.1 Distilled water must be added to the water tank first, and the water pump must be started (the switch is located in the lower left corner of the instrument front)
6.2 Then turn on the power (switch on the right side of the instrument); Special attention: Do not add water, * * do not turn on the power!
6.3 Set temperature: Press the SET button to enter the set temperature state; Press the ▼ key to set the * low temperature; Press the ▲ key to set the temperature increase; After setting the temperature, press the SET button to enter the heating state.
6.4 After constant temperature, it can work.
6.5 Turn off the power after use.
Figure 2 Power switch and water pump switch
Figure 3 Temperature Setting and Display Keyboard
7 sets of equipment: 1 host, 1 power cord, 1 manual, and a certificate of conformity.
Manufacturing: Qiqihar Precision Analytical Instrument Company
Phone: 0452-2478977 Fax: 0452-2478977 Sales Supervisor:
Address: Room 912, 9th Floor, Maite Plaza Business Office Building, No.1 Shifu Road, Qiqiha City, Heilongjiang Province, China 161005
Company Address: www.cdc3432.com Electronic Box: cdc343cdc@163.com
Temperature accuracy adjustment method
1. Press and hold the SET button for 5 seconds to enter the parameter setting state of the instrument. Each press of the SET button will display the following parameters SC P T in sequence.
2. Enter the parameter setting state and adjust SC:
a. If the displayed temperature exceeds the set temperature, the SC display number will be increased;
b. If the displayed temperature does not reach the set temperature, the SC display number will decrease.
3. After adjustment, press the SET button again to restore the instrument to its operational state.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-