Model: CX-110-1 Two Color Oil Cup Printing Machine

1、 Application scope:

This is a small oil cup transfer printer with a steel plate size of 100 * 200mm. This model adopts a tungsten steel oil cup design, which makes ink less likely to splash out during printing. Compared to oil pan transfer printers, it is more environmentally friendly and clean. The slide type structure provides a low-cost solution for two-color printing, with high printing accuracy and easy adjustment. It is suitable for surface pattern logo printing on electronic products, plastic shells, hardware products, stationery, small handicrafts, and gifts.

2、 Technical parameters:

1. Microcontroller IC compilation action program, multiple printing mode options

2. Automatic four digit counter to count the number of prints

3. Fully cast aluminum body, with a surface coated with metal paint

4. Adopt environmentally friendly oil cups

5. The position of the workbench, rubber head, and oil pan can be adjusted freely along the X, Y, and Z axes

6. The adhesive head pressure for ink absorption and printing can be independently adjusted

8. Equipped with automatic forward and backward sliding ink leveling function to prevent local solidification of ink

9. All cylinders have independently adjustable torque for speed

10. Using original Japanese SMC and Taiwanese MINDMAN pneumatic components

11. The adjustment positions are marked with scales

12. The whole machine runs fast, smoothly, and with low noise

Action mode selection: fully automatic | semi-automatic | manual | self programming

Startup method: Panel | Foot switch

Scraper working mode: Pneumatic mechanical valve drives cylinder up and down

Front and back travel: 110mm

Up and down travel: 50MM

Oil pan center distance: 125MM

Maximum printing area: ￠ 80MM

Oil cup ring knife diameter: ￠ 82MM

Oil cup ring knife material: tungsten steel | ceramic

Oil cup ring knife lifespan: 2 million cycles

Steel plate size: 100 * 200mm

Printing speed: 1000 pieces/hour

Power supply: 220V 50-60MHz

Air pressure: 5-7 BAR

Repetitive accuracy<0.05mm

Printing station: 1 position

Fixture fixing method: T-shaped groove table top, pressure code compression

Fixture material selection: Atomic ash | Aluminum | Electric wood | Plastic | Steel

Adhesive head fixing method: wooden screw locking