(including mechanical and electronic interlocking transfer windows, clean transfer windows, self-cleaning transfer windows, laminar flow transfer windows, etc.)Of course, transfer windows are also known as transfer boxes, transfer cabinets, etc. Ordinary device transfer windows are air purification auxiliary equipment used in clean workshops. (Ordinary type) is mainly used between clean rooms, and (Clean type) is the transfer of small items between clean rooms and non clean areas to reduce the number of clean room doors and minimize pollution to the clean room or clean area.

Characteristics of the transmission window:

1. The surface of the box is made of either cold plate spray coating or all stainless steel plate, which has a beautiful appearance.

2. The workspace is made of 304 stainless steel plate, which is flat, smooth, and wear-resistant.

3. Install mechanical or electronic interlocking devices on both sides of the doors to prevent them from being in the open state at the same time.

4. The transfer window is equipped with a dedicated sealing strip to ensure airtightness.

The above transfer window is a standard style, and we can make different specifications and functions according to your needs, such as:

1. Double door electronic interlock transmission window

2. Single door mechanical interlock transmission window

3. Single door electronic interlock transmission window

4. Floor standing cargo shower transfer window

5. UV sterilization transmission window

6. The transmission window of the buzzer intercom, etc

Main accessories of the transfer window:

Speaker (optional for intercom): facilitates communication between internal and external parties, avoiding inconvenience and pollution caused by personnel entering and leaving CLEAN ROOM.

Airtight door: equipped with 5mm thick transparent glass and mechanical or electronic interlocking.

UV sterilization lamp: UV sterilization lamp can be installed to achieve aseptic effect.

Technical parameter description of transfer window:

Note: The above transfer window parameters are for reference only. If you have any special requirements, please contact our company, and we can customize them according to the specific needs of the customer

Introduction to laminar flow transfer window | clean transfer window

The air shower type transfer window is designed according to the type of air shower room. The fan quickly blows out the air and passes through an efficient filter to turn it into clean air. The clean air is sprayed out by stainless steel spray, and the airflow speed is as high as 20M/S or more, which can effectively and quickly remove the dust particles attached to the surface of objects. After circulating the air, it is further purified by the dual filtration effect of the primary filter, and has strong usability.

Laminar flow transfer windows are mainly used in biological clean areas for the transfer of items. They are mainly applied in various clean areas such as biopharmaceuticals, research institutions, disease control centers, large hospitals, university research, biological cleanliness, and applications.

General requirements for laminar flow transfer windows
1. Cleanliness requirements for laminar flow transfer windows: Class B;
2. Double layered inner and outer shell, with circular arc treatment around the inside to ensure seamless connection;
3. Adopting laminar flow design, the airflow direction adopts an upward return mode, and the bottom adopts a 304 stainless steel cold-rolled plate punching design with reinforcing ribs;
4. Filters: G4 is used for the initial efficiency filter, and H14 is used for the high-efficiency filter;
5. Wind speed: After passing through the high-efficiency filter, the outlet wind speed is controlled at 0.38-0.57m/s (tested 150mm below the high-efficiency outlet flow plate);
6. Differential pressure function: display filter differential pressure (range high efficiency 0-500Pa/medium efficiency 0-250Pa), accuracy ± 5Pa;
7. Control function: Fan start/stop button, equipped with built-in electronic door interlock; Set up UV lights and design separate switches. When both doors are closed, the UV lights should be in the on state; Set up lighting fixtures and design separate switches;
8. The high-efficiency filter can be disassembled and installed separately from the upper box, making it easy to maintain and replace the filter;
9. Set up an inspection port at the bottom of the transfer window for the maintenance of the fan;
10. Noise: When the transmission window is running normally, the noise is less than 65db;
Characteristics of our clean transfer window
1. Stainless steel shell and inner liner, seamless connection method, rounded transition at corners, easy to clean, in compliance with GMP standards
2. PAO injection port, detection port, pressure difference detection port, in compliance with GMP leak detection
3. Double layer tempered glass door, with smooth inner and outer surfaces that are easy to clean, and can prevent collision, scratches, and weak acid and alkali
4. Double door interlock ensures that both doors cannot be opened simultaneously
5. Adopting liquid tank sealed high-efficiency or ultra high efficiency filters
6. Using silicone one-time molding sealing material, the sealing performance of the purlin is high

Optional configuration for clean transfer window
1. Optional mechanical linkage, electronic or electromagnetic interlocking device
2. The long-distance transfer window workbench adopts non powered ball bearings, making it easy and convenient to transfer items
3. Hidden UV sterilization lamp, sterilization time adjustable and cumulative time
4. Material options include stainless steel or cold plate spray coating
5. Pairable call intercom

Parameter description of laminar flow transfer window | clean transfer window:

Transfer window | laminar flow transfer window | clean transfer cabinet | air shower transfer box productLink:http://www.songfengkou.com/43/