Product Details/PRODUCT DETAILS

Product features:

1. The sintering and cooling of thin film pressing equipment can be carried out under pressure or free state inside the mold. The advantages of this molding method are high product density, good dimensional stability, and suitability for small-sized plates, rods, thick walled tubes, and other products. However, this process has low production efficiency and cannot produce ultra long or thin-walled products, with high labor intensity and high cost.

2. The horizontal manufacturing equipment for ultra-high molecular weight polyethylene, nitrocellulose, and polytetrafluoroethylene imported from abroad can only produce thick walled pipes and cannot produce thin-walled pipes, which cannot meet the needs of users for thin-walled pipes, long rods, and long plates.

3. The sintering and cooling of thin film pressing equipment can be carried out under pressure or free state inside the mold. The advantage of this forming method is that the product density is high, the dimensional stability is good, and it is suitable for small-sized plates, rods, thick walled tubes and other products

Usage principle:

1. It consists of three parts: the main engine, hydraulic station, and electrical control box. The hydraulic cylinder is fixed on the interactive platform.

2. The hydraulic actuator cylinder is fixed to the upper plate of the interaction table by screws, and the lower machine base box is installed with a specific mold. Electromagnetic vibration feeding machines are installed in the left and right side boxes of the upper part of the interaction table, forming a vertical pushing machine.

3. The oil cylinder is divided into three sections: core pulling cylinder body, transition cylinder body, and compression cylinder body. The piston rod is located in the compression cylinder body Install the compression piston on top, install the core pulling piston on the piston rod of the core pulling cylinder body, and install Y. at the connection points

Yx type sealing ring and 0-type sealing ring ensure sealing and prevent leakage. They are locked and positioned by elastic snap rings to complete the specific molding work of the inner and outer molds.