Specific parameters:

※ It is a registered company under the FDA and its products are registered with the FDA.

Performance characteristics

• Temperature range:

  -Room temperature+5 ° C to 80 ° C (applicable to ISF-7100/7200)

  -Room temperature -15 ° C (4 ° C) to 80 ° C (applicable to ISF-7100R/7200R)

• The speed can reach 500rpm

  -Speed range: 30 to 500rpm

• Circular orbit motion diameter:

  - 25.4mm(ISF-7100/R)

  - 50.8mm(ISF-7200/R)

• Microfabrication PID controller.

• Three point calibration function/automatic adjustment function/automatic operation function.

• In the case of heavy overload, it also has the characteristic of a wide speed range.

  -The direct drive brushless motor and triple cam system have the characteristics of load-bearing capacity, quietness, and maintenance free, and perform high torque and smooth rotation at high speeds.

• Even under heavy loads, the intelligent system will automatically adjust the speed during operation.

  -When the system load is running, it will automatically adjust the speed (due to uneven desktop causing load imbalance and abnormal oscillation).

• Smooth acceleration and deceleration control provide an ideal testing environment.

  -The smooth start and stop function can prevent chemicals from overflowing from the flask or test tube.

• The high-speed rotating fan ensures that the temperature inside the chamber is sufficiently uniform and can quickly recover after opening the door.

• Sealed silicone doors can maintain uniform internal temperature.

Simple operation

• Touchscreen LCD controller with simple and easy to understand icons and menu bar.

• The speed timing function is easy to operate (1 minute~999 hours and 59 minutes).

• Easy to observe and place samples.

  -There is a transparent observation window at the top, coupled with standard LED lights, which allows for clear observation of the internal sample status without the need to open the door.

  -The transparent observation window with a slight forward tilt at the top is more convenient for observing samples and conforms to ergonomic design.

  -The pressure spring cover supports the lid, allowing it to open and close smoothly and safely.

• The platform maintains a consistent position both before and after operation.

  -After the operation stops, the position of the platform remains in one place for the convenience of ingredient or sample processing.

• The interior of stainless steel can prevent corrosion.

• There is a drain valve at the wastewater outlet, which is very convenient for cleaning up spilled substances

• Built in RS-232 and USB interfaces, convenient for external use and data collection.

• The standard casters are very easy to install and move.

safety features

• Automatically operate after power outage and restoration.

• Temperature and speed deviation alarm.

• Current overload protection.

• Three independent temperature monitoring systems.

  -Temperature deviation alarm (high/low)

  -Electronic temperature limiter (high/low)

  -Mechanical over temperature limiter (high)

• Refrigerant without Freon. (Applicable to ISF-7100R/ISF-7200R).