VIP member
Product details
Manufacturer:
Aditek Corporation, USA
Introduction:
The HP125 series temperature and humidity probe can accurately measure relative humidity, temperature, dew point temperature, pressure (psi), atmospheric pressure, etc.
Model selection:
|
model |
describe |
Factory default output |
|
HP125 |
Humidity/Temperature Stainless Steel Probe |
RH、 Temperature and dew point temperature 4-channel 0-10VDC output, RS232 output, 24VDC power supply |
|
HPP125 |
Humidity/Temperature/Pressure Stainless Steel Probe |
Pressure RH、 Temperature and dew point temperature 4-channel 0-10VDC output, RS232 output, 24VDC power supply |
|
HPB125 |
Humidity/Temperature/Atmospheric Pressure Stainless Steel Probe |
Atmospheric pressure RH、 Temperature and dew point temperature 4-channel 0-10VDC output, RS232 output, 24VDC power supply |
|
HP125-DCW |
HP125 probe and secondary display table |
RH、 Temperature and dew point temperature, 2-channel 4-20mA output, RS232 output, two alarm relay outputs, 24VDC power supply |
|
HPP125-DCW |
HPP125 probe and secondary display table |
Pressure RH、 Temperature and dew point temperature, 2-channel 4-20mA output, RS232 output, two alarm relay outputs, 24VDC power supply |
|
HPB125-DCW |
HPB125 probe and secondary display table |
Atmospheric pressure RH、 Temperature and dew point temperature, 2-channel 4-20mA output, RS232 output, two alarm relay outputs, 24VDC power supply |
TECHNICAL INDEX
|
accuracy |
|
|
RH |
±1.8%@23℃(0~90%RH) |
|
temperature |
±0.5℃ |
|
pressure |
± 1mbar@25 ℃±5mbar（-40℃~-10℃DP） |
|
dew point |
+1℃（-10℃~95℃DP）+2℃（-60℃~-10℃DP） |
|
Pressure range: 55bar |
|
|
Operating temperature:- 40℃~=125℃ |
|
|
measuring range |
|
|
RH |
0~99.9% (non condensing) |
|
temperature |
-40℃~+125℃ |
|
dew point |
-40-95 ℃ (dp) (standard) -60~95 ℃ (dp) (optional) |
|
pressure |
0~400psia（0~27.6bar）（HPP125） |
|
atmospheric pressure |
600~1200mbar（HPB125） |
other
|
Probe cable length |
1 meter, if you need to extend, please consult the factory |
|
Probe size |
Length: 241.3mm Diameter: 12.7mm |
|
Probe material |
stainless steel |
|
power supply |
24VDC ± 10%, 50mA * large |
|
install |
1/2 "MaleNPT (standard) or 3/4" inch MaleNPT (optional) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-