VIP member
Taiwan Chengtai CNC lathe horizontal high-speed turning milling composite machine GLS-150 series
Taiwan Chengtai CNC lathe horizontal high-speed turning milling composite machine GLS-150 series GLS-150 series
Product details
Taiwan Chengtai CNC lathe horizontal high-speed turning milling composite machine GLS-150 series
| GLS-150 series |
|---|
| Important Elements | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Maximum rotation diameter | Ø 500 mm | ||
| Bed saddle cover rotation diameter (front door) | Ø 380 mm | ||
| Maximum turning diameter * 1 | Ø 400 mm / Ø 280 mm*2 | ||
| Standard turning diameter * 1 | Ø 165 mm | Ø 204 mm | Ø 254 mm |
| Maximum turning length * 1 | 500 mm / 340 mm*2 | ||
| Maximum workpiece weight * 3 | 85 kg | ||
| COLLET SIZE | Ø 6' | Ø 8' | Ø 10' |
| Bar diameter | Ø 45 mm | Ø 51 mm | Ø 65 mm |
| main shaft | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Main spindle aperture | Ø 56 mm | Ø 66 mm | Ø 76 mm |
| Main shaft bearing diameter | Ø 80 mm | Ø 100 mm | Ø 120 mm |
| Hydraulic cylinder diameter | Ø 6' | Ø 8' | Ø 10' |
| Spindle nose end | A2-5 | A2-6 | A2-8 |
| Spindle Motor | β 8 / 8,000i | β 8 / 8,000i | β 12 / 7,000i |
| Motor horsepower (continuous) | 7.5 kW ( 10 HP ) | 11 kW ( 15 HP ) | |
| Motor horsepower (30 minutes) | 11 kW ( 15 HP ) | 15 kW ( 20 HP ) | |
| Motor full horsepower output speed | 1,500 rpm | 1,500 rpm | 1,500 rpm |
| Spindle transmission mode | Driven by a straight belt | ||
| Spindle drive ratio | 1 : 1 | 7 : 10 | 7 : 12 |
| Spindle speed | 60 ~ 6,000 rpm | 42 ~ 4,200 rpm | 35 ~ 3,500 rpm |
| Spindle full horsepower output speed | 1,500 rpm | 1,050 rpm | 875 rpm |
| Concealed spindle motor (Selected) |
GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Spindle Motor | α B112M / 15,000i | --- | --- |
| Motor horsepower (continuous) | 5.5 kW ( 7.4 HP ) | --- | --- |
| Motor horsepower (30 points/peak) |
7.5 kW ( 10 HP ) | --- | --- |
| Cs axis (optional) | ||||
|---|---|---|---|---|
| C-axis motor | Spindle motor+Bz sensor Ø 125/MPCI-9051A | |||
| Minimum spindle positioning accuracy | 0.001° | |||
| Dynamic accuracy | ±0.02° | |||
| X&Z axis | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Maximum X-axis travel * 1 | 220 / 215 mm ; [ 10-St. / 12-St. ] | ||
| Maximum Z-axis travel * 1 | 520 mm | ||
| X/Z-axis rapid feed | 24 / 30 m / min. | ||
| Sliding rail type | Track | ||
| feed rate | 1 ~ 4,800 mm / min. | ||
| X-axis servo motor | AC 1.2 kW (1.6 HP, FANUC β 8/3000i, absolute decoding, 1000000/rev) | ||
| Z-axis servo motor | AC 1.2 kW (1.6 HP, FANUC β 8/3000i, absolute decoding, 1000000/rev) | ||
| X-axis ball screw Diameter/Pitch |
Ø 32 mm / 10 mm | ||
|
Z-axis ball screw |
Ø 32 mm / 10 mm | ||
| X/Z-axis thrust (continuous) | 448 kg | ||
| turret | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Tower capacity | 12 knives (choose 10 knives) | 10 knives (choose 12 knives) | |
| motor | FANUC AC servo motor | ||
| Tool changing speed | 0.2 seconds (adjacent blades)/0.5 seconds 180 ° (opposite blade) | ||
| accuracy | Positioning: ± 0.00069 °, reproducibility: ± 0.00027 ° | ||
| Square shaped cutting tool | □ 20 mm | □ 25 mm | |
| Circular cutting tool | Ø 32 mm | Ø 40 mm | |
| Power turret (optional) | GLS-150 | GLS-200 | GLS-260 | |
|---|---|---|---|---|
| Maximum turning length | 340 mm | |||
| Tower capacity | 12 | |||
| Power turret capacity | 6 (simultaneous rotation of cutting tools) | |||
| Power tower motor power | AC 1.2 kW (1.6 HP, FANUC β 8/3000 is, absolute decoding, 1000000/rev) | |||
| Power turret motor torque | 7 N-m [continuous] | |||
| motor | FANUC AC servo motor | |||
| Tool changing speed | 0.2 seconds (adjacent blades)/0.5 seconds 180 ° (opposite blade) | |||
| Square shaped cutting tool | □ 20 mm | |||
| Circular cutting tool | Ø 25 mm | |||
| Power turret tool specifications | 1 ~ 13 mm ER 20 | |||
| Power turret speed | 10 ~ 4,400 rpm | |||
| Y-axis (optional) | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| block type | Ø 280 mm | ||
| Maximum travel of X-axis | 195 mm | ||
| Maximum Y-axis travel | 70 mm = ± 35 mm | ||
| X/Y axis fast feed | 24 / 10 m / min. | ||
| Sliding rail type | Track | ||
| feed rate | 1 ~ 4,800 mm / min. | ||
| X-axis servo motor | AC 1.2 kW (1.6 HP, FANUC α 8/3000 i, absolute decoding, 1000000/rev) | ||
| Y-axis servo motor | AC 1.2 kW (1.6 HP, FANUC α 8/3000 i, absolute decoding, 1000000/rev) | ||
| X-axis ball screw Diameter/Pitch |
Ø 32 mm / Pitch 10 | ||
| Y-axis ball screw Diameter/Pitch |
Ø 32 mm / Pitch 6 | ||
| X/Y-axis thrust (continuous) | 513 / 855 kg | ||
| Tailstock (optional) | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Cone shaped hole inside the spindle | MT # 4 (active ejector pin) | ||
| Spindle diameter/stroke | Ø 70 / 150 mm | ||
| Tail seat body travel * 1 | 290 mm | ||
| Programmable control spindle /Tail seat body |
Yes / No | ||
| Tail seat body movement mode | Hydraulic motor+gear rack; Servo motor+ball screw (optional) | ||
| General specifications | GLS-150 | GLS-200 | GLS-260 |
|---|---|---|---|
| Positioning accuracy (X/Y/Z) | ± 0.005 mm | ||
| Reproducibility (X/Y/Z) | ± 0.003 mm | ||
| Standard controller | FANUC Oi Mate (using Oi TD) | ||
| Voltage/power demand | AC 200/220+10% to -15% 3-phase/26 kVA | ||
| Oil pressure tank capacity | 50 L | ||
| Cooling water tank capacity | 100 L | ||
| Cooling pump | 0.5 kW ( 3/4 HP , 60Hz ) rated at 3 bar | ||
| machine weight | 3,200 kg | ||
| machine weight (Y-axis model) |
3,600 kg | ||
| appearance (Length x Depth x Height) * 1 |
2,260 x 1,490 x 1,675 mm | ||
| Y-axis model: 2450 x 1655 x 2060 mm | |||
High speed CNC turning center
Carrying industry-leading technology and high-quality parts, the Chengtai GLS series lathes combine high horsepower, fast processing, and high rigidity structure to provide efficient composite turning and milling capabilities. This series of CNC lathes can easily meet your cutting needs today and in the future. In addition, by using a power turret, C-axis, and Y-axis, composite machining functions such as turning, milling, and drilling can be performed on the same machine. It is also possible to perform contour milling on end faces and cylindrical surfaces
The 30 degree inclined bed structure makes it easy for operators to get up and down workpieces and smoothly discharge chips
The use of industrial grade rubber coated special steel sheets fused together into a scraper blade and stainless steel slide rail cover ensures the durability of the lathe
Fully covered protective sheet metal isolates turning iron chips from coolant inside the machine, providing you with a safe and clean working environment
The automatic lubrication system provides precise adjustment of lubricating oil for slides, ball screws, and other important components. The lubricating oil distribution system will automatically shut down during standby to avoid waste
Y axis
The use of Y-axis function makes the processing method of GLS series similar to that of a machining center machine equipped with a fourth axis rotating table. (The X, Y, Z axes are the same as the X, Y, Z axes of the machining center machine, and the C axis is the same as the fourth axis rotating table); This method of integrating lathes and machining centers into the same machine can significantly save manpower, processing time, floor space, and procurement costs of machines and fixtures, as well as reduce various uncertain factors caused by handling workpieces
Power Knife Tower
The use of power turret and C-axis control makes the GLS series a turning milling composite center, which can complete turning, milling, drilling, and tapping of a workpiece in the same lathe. Avoid errors caused by workpiece movement between machines and save processing time and manpower
Super strength structure
The bed with high-efficiency reinforced ribs is not only cast as a whole, but also made of high tension Mihanna cast iron and designed with heat flow balance, which can meet the needs of long-term processing and use. Due to the casting's ability to provide large shock absorption damping and reduce deformation, the machine is not only durable but also has outstanding performance
The main machine components are integrated into a strong foundation, with a low center of gravity body and a 30 degree saddle design providing an extremely stable base for the nose, turret, and tailstock
By using finite element analysis (FEM), the reinforcement ribs of the integrated bed platform were optimized, resulting in a 30% increase in mechanical strength compared to traditional designs. So the GLS series products can be used for heavy cutting and maintain long-term ultra-high precision. The high rigidity structure of the machine can extend the service life of the machining tools
processability
Specifications related to power turret
| output power | 1.2 kW ( 1.6 HP ) |
|---|---|
| Motor Model | FANUC β8 / 3000 is |
| Maximum drilling capacity | M8 * P1.25 |
| Maximum milling capacity | Ø 12 * 10 mm |
| Gear ratio | 22 : 15 |
Composite milling capability
| cutting tool | Spindle speed ( rpm ) |
Cutting rate ( mm / min. ) |
Cutting Speed ( m / min. ) |
Cutting Depth ( mm ) |
|
|---|---|---|---|---|---|
| drill | Ø 13 HSS | 650 | 65 | 26.5 | not have |
| End mill cutter | Ø 12 HSS end drill | 600 | 60 | not have | 0.39 |
| TAPPING | M8 * P1.25 | 600 | 750 | 15 | not have |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-