Introduction to TFB-DZ customized stainless steel fluorescent wind vane

TFB-DZ

Customized stainless steel fluorescent wind vane placed outdoors to indicate wind direction. All metal structure, stainless steel frame, aluminum alloy standard plate, strong corrosion resistance. The service life is over 20 years. Fully standardized and specialized, the outer surface has been polished for a beautiful and atmospheric appearance. The front and rear wings of the wind vane are coated with high-tech materials with fluorescent and reflective functions, which automatically absorb and store visible light sources during the day and emit light at night; The reflective function reflects direct light, and when the light source directly shines on the wind vane, it can emit a striking reflection. The length, size, and height of the directional marker can be customized according to customer needs.

Product Usage

Widely used in urban landscape, meteorology, chemical industry, environmental protection, agriculture, oil field exploration and other industries.

Product parameters

Directional marker length: 1200mm (standard), customizable

Overall height: 1700mm (standard), customizable

Front panel: 140 × 80mm (standard), customizable

Tail label plate: 400 × 350mm. (standard), customizable

Bracket: 1500mm (standard), customizable

Base area: 200 × 200mm (standard), customizable

Installation Guide

1. Installation location selection:

This product is suitable for installation on the flat roof of buildings or on the flat surface of iron towers. The surrounding area should be relatively open and easy for ground personnel to observe.

2. Installation:

The cement floor is fixed to the base with expansion bolts of Φ 8 × 80mm; Fix the base of the iron tower with screws at the plane; Install the main pole and base in place.

3. Attention:

The main pole should be installed perpendicular to the ground. If the installation site has a steep slope, a 300 × 300mm cement platform should be cast first for installation. If there is only a small angle of inclination, it can be adjusted by adding washers at the bottom of the base.

4. Lightning protection measures:

If at a high place, the base should be securely connected to the lightning rod and lightning strip.

Packing list:

Metal wind vane marker (red)

Label board (one large and one small)

Support rod (flange type without)

Base (flange type without)

Assemble stainless steel screws (one bag each for the standard body and base)

Product manual