TFA series oil suction filterCan only be installed on the upper part of the fuel tank, with the suction cylinder submerged below the liquid level in the tank. Other performance is similar to the TF series, but without a self sealing valve. When the hydraulic oil filter element is blocked by pollutants and the vacuum degree at the oil outlet is 0.018MPa, the transmitter will send a signal, and the filter element should be replaced or cleaned in a timely manner. If the machine cannot be stopped immediately or no one comes to replace the filter element at this time, the oil circuit bypass valve on the filter element will automatically open (opening value: vacuum 0.02MPa) to avoid suction failure of the oil pump. But at this time, the machine should be stopped to replace or clean the filter element to maintain the cleanliness of the hydraulic system and improve its reliability.

1. Easy installation and connection, simplifying system pipelines: The oil filter can be directly installed on the side, bottom, or top of the fuel tank, with the filter head exposed outside the tank and the oil suction body immersed below the liquid level in the tank. The oil outlet is equipped with pipe and flange connections, and the filter is equipped with self sealing valves and other devices to simplify the pipeline and facilitate installation.

2. Set up a self sealing valve to make it very convenient to replace, clean or repair the filter element or system: When replacing, cleaning or repairing the filter element or system, simply unscrew the filter end cover (cleaning cover), and the self sealing valve will automatically close, isolating the oil circuit of the fuel tank and preventing the oil in the tank from flowing out, making cleaning, replacing the filter element or repairing the system very convenient. If the self sealing valve is opened, it can also be used to discharge oil from the tank.

3. Equipped with a filter pollution transmitter and an oil circuit bypass valve, it improves the reliability of the hydraulic system.

Nominal flow rate: 25-800L/min

Filtering accuracy: 80-180 μ m

Diameter: 15-90mm

Connection method: thread, flange

Filter element model: TFA series

1. In the petrochemical industry: separation and recovery of products and intermediate products in refining and chemical production processes, as well as particle filtration of oilfield injection water and natural gas.

2. In the textile industry: purification and uniform filtration of polyester melt during the drawing process, protective filtration of air compressors, and removal of oil and water from compressed gases.

3. In the thermal power industry: purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

4. In mechanical processing: lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery, dust recovery and filtration for tobacco processing equipment and spraying equipment.