TF (LXZ) external self sealing oil suction filterIt can be directly installed on the side, upper or bottom of the fuel tank. The oil suction cylinder is immersed below the liquid level in the fuel tank, and the filter head is exposed outside the tank. It is equipped with self sealing valves, bypass valves, filter element pollution blockage transmitters and other devices, so that the oil in the tank will not flow out when replacing or cleaning the filter element. This product has the advantages of novel design, easy installation, high oil flow capacity, low resistance, and convenient cleaning or replacement of the filter element.

1. The oil suction filter is easy to install and connect, simplifying the system pipeline;

2. Setting up a self sealing valve makes it very convenient to replace, clean, or repair the filter element or system;

3. Equipped with a filter pollution transmitter and an oil circuit bypass valve, it improves the reliability of the hydraulic system.

Flow rate: 25-1300L/min

Filtering accuracy: 80-180 μ m

Work pressure: 0.6MPA

Diameter: 15-90mm

Connection method: tubular flange

Working medium: general hydraulic oil, phosphate grease, hydraulic oil emulsion, water hexanediol

1. Thermal power and nuclear power: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

2. Textile and packaging: Filter cartridges are used for purification and uniform filtration of polyester melt in wire drawing engineering, protective filtration of air compressors, and oil and water removal of compressed gases.

3. Electronics and pharmaceuticals: Filter cartridges are used for pre-treatment filtration of reverse osmosis water and deionized water, as well as pre-treatment filtration of cleaning solutions and glucose.