Product Introduction

TAE SUNG automatic pop-up drawer oven from South Korea TSA-101,TSA-102,TSA-103
The automatic discharge oven is mainly suitable for pre coated coil steel (PCM) coating, metal plate coating, and can making coatings or inks with short curing times (10-50 seconds).

TSA-101

TSA-101The main purpose of the automatic discharge oven is to pre coat coil steel（PCM）Coating and metal sheet coating, as well as canning（Can）Using paint or ink（Ink）Short waiting time for heat curing（10~50Wait for seconds.
The characteristic of the automatic discharge oven is that the wind speed can be adjusted to evenly spray hot air onto the surface of the test piece, thereby improving its thermal energy efficiency. And the experiment was conducted with a baking time close to the continuous color coating line, and multiple test pieces were tested continuously without any color or gloss differences.

technical specifications

model:TSA-101

Temperature: not exceeding350℃

Common temperature:50~300℃

Heating rate: Heating up350Time required for ℃/1Within hours (based on spring and summer standards)

Temperature indication accuracy:±1.O℃

Temperature distribution (environment):±1.O℃

Sample size: not exceeding250mm＊330mm

Sample insertion port:1individual

Power Supply:3，380V

Capacity:7.85kw

External dimensions:make an appointmentW1,140mm＊H1,760mm＊D930mm

Internal material: SUS 316 1.5T

Sample placement bracket: 1bracket– SUS 304

Bracket up and down movement device:Electric type

circulating fan:diameter232mmDouble hot air blowerMade of SUS 304

Temperature regulator: digital setting digital display range:0~399℃

Timer: Digital setting digital display range:0 ~ 999.9second

Heater: External installation heater with heating plate Capacity:6.3kw（0.7kw＊9 pieces）

heaterRelay: Contactless relay

Wind speed regulator: wind speed regulation range1 ~ 5m（basically 3M）

Airflow:25m³/divide

Mobile: Freely movable wheels (with locking device)- 4individual

Safety device:

1） Adjustment plate for introducing external air: Adjust the adjustment plate when heating up.

2） Prevent overheating adjustment machine: digital adjustment and digital display. Range:0~399℃

3） Warning buzzer under abnormal conditions

4） Safety door (top): In the event of an explosion,5） Open and cut6） Cut off all power sources

7） Blower motor: Safe and explosion-proof type1.5kw inverter moter

8） Motor protection: installed to prevent motor overheatingRelay

9） Sample holder locking device

Sample surface temperature measuring device: measures the temperature rise rate of the sample

Thermal insulation material:All ceramic filber

HEAT-LABBEL 9Allowable deviation range for temperature distribution map of point heat treatment1Within a certain distance（200mm＊300mmStandard board benchmark. Wind speed:1~5mTemperature conditions: operating temperature, heat treatment time: not less than20Seconds)

Weight: make an appointment600㎏

TAE SUNG automatic pop-up drawer oven from South KoreaTSA-102

technical specifications

Model: TSA-102

Temperature: not exceeding 450 ℃

Common temperature: 50~400 ℃

Heating rate: Time required to heat up to 300 ℃/1 hour (based on spring and summer standards)

Temperature indication accuracy: ± 1.0 ℃

Temperature distribution (environment): ± 1.0 ℃

Sample size: not exceeding 250mm * 330mm

Sample insertion port: 1 piece

Power supply: 380V

Capacity: 11kw

Dimensions: Approximately W1340mm * H1860mm * D990mm

Internal material: SUS 316 1.5T

Sample placement bracket: 1 bracket - SUS 304

Bracket up and down movement device: electric type

Circulating fan: Double hot air fan with a diameter of 232mm

Made of SUS 316

Temperature regulator: digital setting digital display

Range: 0~450 ℃

Timer: Digital setting digital display

Range: 0~999.9 seconds

Heater: External mounted heater with heating plate

Capacity: 9.0kw (1.0kw * 9 pieces)

Heater Relay: Contactless Relay

Wind speed regulator: wind speed regulation range

1 ~ 5m（basically 3M）

Airflow: 25m3/min

Mobile: Freely movable wheels (with locking device) -4 pieces

TSA-103

technical specifications

Model: TSA-103

Temperature: not exceeding 540 ℃

Common temperature: 100~500 ℃

Heating rate: Time required to heat up to 400 ℃/1 hour (based on spring and summer standards)

Temperature indication accuracy: ± 1.0 ℃

Temperature distribution (environment): ± 1.0 ℃

Sample size: not exceeding 250mm * 330mm

Sample insertion port: 1 piece

Power supply: 3380V

Capacity: 14.2kw

Dimensions: Approximately W1520mm * H1950mm * D990mm

Internal material: SUS 316 5.0T

Sample placement bracket: 1 bracket - SUS 316

Bracket up and down movement device: electric type

Circulating fan: Double hot air fan with a diameter of 232mm, made of SUS 316

Temperature regulator: digital setting digital display range: 0~500 ℃

Timer: Digital setting digital display range: 0~999.9 seconds

Heater: External installation with heating plate Capacity: 12.6kw (1.4kw * 9 pieces)

Heater Relay: Contactless Relay

Wind speed regulator: Wind speed regulation range of 1~5m (basically 3M)

Airflow: 25m³/Divide

Mobile: Freely movable wheels (with locking device) -4 pieces

Safety device:

1) Adjustment plate for introducing external air: Adjust the adjustment plate when heating up.

2) Prevent overheating adjustment machine: digital adjustment and digital display. Range: 0~500 ℃

3) Warning buzzer under abnormal conditions

4) Safety door (top): In case of explosion, 5) open and cut off 6) cut off all power supply

7) Blower motor: Safety explosion-proof 1.5kw inverter motor

8) Motor protection: Install a relay to prevent motor overheating

9) Sample holder locking device

Sample surface temperature measuring device: measures the temperature rise rate of the sample

Insulation material: All ceramic film

The allowable deviation range for the temperature distribution map of HEAT-LABBEL 9-point heat treatment is within one interval (200mm * 300mm standard plate benchmark). Wind speed: 1~5m, temperature conditions: operating temperature, heat treatment time: not less than 20 seconds)

Weight: Approximately 1000kg