VIP member
Product details
The rotating system is equipped with a six pole cylindrical magnet. Hall effect sensors detect rotational motion,
Simultaneously generate pulses on the channels of each magnetic pole. The size of the cup is small, the material is lightweight, and it can achieve very low
The mechanical inertia ensures high sensitivity of the measurement. The structure of the anemometer is very sturdy, and the sensing element has
Reliable durability, with appropriate resistance even at high wind speeds. Moreover, its design is simple, compact, and convenient
Easy to install and facilitate on-site maintenance activities. The sensor is equipped with a power and signal cable (12 meters), which can be customized according to requirements
Optional heated sensor with a power supply of 24 volts (AC or DC).
Product specifications and parameters
Sensor type 6-pole magnet and stable Hall effect sensor
Measurement range 0.25-50m/s
Resolution 0.1m/s
accuracy <0.15 or 1% of the measured value
Operating temperature environment -40 ° C -+70 ° C
Humidity 0% -100%
Conventional output leakage output: VV measurement is given by the following frequency f: VV = f [Hz] / 3.3676 [Hz/ m/s] +0.1881 [m/s]
Voltage output 0-2 V ↔ 0 -- 50 [m/s]
Current output 4-20 mA ↔ 0 -- 50 [m/s]
RS485-Modbus Wind speed [m/s]
SDI – 12 Wind speed [m/s]
Anemometer power supply voltage 7-24 Vdc
Heating system power supply voltage 12-24 V [DC or AC]
Heating system power 40 W @ 24 V
Product material cup: PA6+30% fiberglass, made of aluminum alloy and stainless steel screws as a whole
Weight 750 g
Product size Ø MAX=230 mm; Height=336 mm
Interface protection level IP67
Order model
Standard product model T031-TVV-N
Current output, voltage output, and RS485 Modbus output T031a-TVV-IVS
SDI-12 Output T031d-TVV-12
Including heating system, standard output T032- TVVR-N
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-