Stainless steel two-way ball valve
Also known as on/off valve, it controls the opening and closing of the air circuit. It is a high-quality valve selected for laboratory air circuit control. The valve is made of stainless steel and is widely used in the chemical, laboratory, pharmaceutical, and health industries

Material: 316 stainless steel

Product selection: All forged valve body structures

Maximum pressure resistance 6000psi

Applicable temperature: ≤ 200 degrees

Applicable media: non corrosive or corrosive media such as oil, water, gas, etc

Piping: ordinary grade precision seamless steel pipes with metric specifications of Φ 3- Φ 12 and imperial specifications of 1/16-3/8

Features: The sleeve type connector has the characteristics of reliable connection, high pressure resistance, good sealing and repeatability, easy installation and maintenance, safe and reliable operation, etc

Assembly method of sleeve type pipe joint:

The performance of sleeve type pipe joints is not only related to the material, manufacturing accuracy, heat treatment, etc. of the parts, but also to the assembly quality. Therefore, the assembly should be carried out according to the following methods.

1,Cut the pipe according to the required length on a specialized machine tool, or manually saw it. The perpendicularity of the cut surface to the centerline of the pipe shall not exceed half of the tolerance of the pipe on the outside.

2,Remove burrs, metal shavings, and dirt from the inner and outer circles of the pipe end.

3,Remove rust proof oil and dirt from all parts of the pipe joints.

4,Put the curtain in order, insert the card sleeve onto the pipe, and then insert the pipe into the bottom of the taper hole in the joint body, and place the card sleeve correctly. While tightening the nut, rotate the pipe until it stops moving, and then tighten the nut 1-1 1/3 turns