The slitting machine is suitable for central kitchens, group meals, canning factories, rapid freezing factories, dry food processing, agricultural product processing, food processing factories, and school restaurants. The whole machine is made of 304 stainless steel, which is easy to operate, beautiful and durable. Cucumbers, eggplants, radishes, zucchini, sweet potatoes, baby bok choy, cabbage, etc. can be sliced and divided into sections. This machine is equipped with universal brake wheels for easy relocation, which can flexibly schedule and improve production efficiency; According to the size of the ingredients, the corresponding guide mold can be adjusted to make the production process safer. Fast cutting speed, large cutting volume, and good cutting effect. Double blade cutting is adopted, with two sets of blades on the left and right sides respectively processing the food without damaging the fiber tissue of the food. The cutting material is beautiful and the size is consistent and uniform. This machine is easy to operate, has a large output, and is easy to maintain, which can meet the production needs of a wide range of users.

Structural composition

The whole machine is made of 304 stainless steel, imported cutting tools, power transmission components, electrical system and other parts.

Working principle

This device uses a reduction motor as the power source to drive the blades on the active shaft, dividing the food into strips and slices. Various ingredients are automatically cut by selecting suitable feeding molds based on their size.

product name	productmodel	External dimensions
slitter	HYTW-823	770*770*1370mm
production capacity	power	Cutting specifications
300-500kg/h	0.6KW/220V	4 petals
Machine weight	Feed diameter
53KG	≤120mm

1. After unpacking the machine, it should be placed in a stable and spacious place. 2. Check if the appearance of the machine has been damaged during transportation. 3. Check if there are any foreign objects at the inlet and outlet of the machine body. 4. After moving the machine to the designated area, press the foot brake to stabilize it. Do not park the machine on a sloping ground. 5. This machine is connected to a 220V AC power supply, and the equipment must be reliably grounded. 6. The user is using this machine for the first time, please turn it on for a trial run and observe if there are any abnormalities during operation. 7. After the inspection is completed and there are no abnormal situations, turn off the machine and install the accompanying guide mold before it can work.

8. This machine is equipped with button switches, which are green start and red emergency stop buttons. 9. Please divide the product to be processed into lengths of 120 (mm) before processing. 10. Before cutting ingredients, the feeding basket should be placed at the center of the bottom of the equipment to prevent the materials from splashing out. 11. Press the green button on the machine to start working. 12. Slowly place the material into the feeding port, and the machine begins to perform slitting work. 13. After the machine completes its work, simply turn off the power. Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

1. Do not insert your hands into the machine while it is in operation.

2. After using the machine, please make sure to cut off the power before disassembling and washing it.

3. Please do not invest too much raw material at once.

4. If the machine is not used for a long time, please apply anti rust oil and store it.

5. Do not rinse the power switch of the machine directly with water to avoid machine malfunction.

7. If loose screws or nuts are found, please stop the machine immediately and tighten it before starting to operate.

Maintenance

1. After each use of the machine, please make sure to turn off the power before disassembling and washing it.

2. Do not place metal or hard objects on the machine to avoid falling into the feeding port, damaging the blades and the machine.

3. The machine should be placed in a ventilated environment, as it generates a certain amount of heat during operation. Maintaining ventilation can reduce the temperature generated during machine operation, thus providing better maintenance for the machine.