Name: Single phase electronic prepaid meter, IC single-phase meter, card swiping single-phase meter

Specification: 5 (20) A, 10 (40) A, 15 (60) A, 20 (80) A

Product Introduction:

1. One table, one card: The IC card held by the user cannot be exchanged. In case of loss, a replacement card should be purchased from the power supply department (i.e. the electricity sales office).

2. Preparation for purchasing electricity: Users must insert the IC card into the card slot once to facilitate the return of data from the meter to the computer database.

3 ways to purchase electricity: When selling electricity, insert the IC card into the IC card reader and operate the computer to encrypt the user ID, pre purchased power, capacity limit method, and power limit into the IC card.

4. Electricity card usage: Insert the power purchase card into the card slot. If it is a valid power purchase card, the meter will automatically read the data into the meter. The LCD (LED) display screen will show the following in sequence: purchased electricity (P0=XXXX), total purchased electricity (P=XXXXXX), purchased electricity times (PC=XXXX), alarm electricity (P1=XXXX), credit limit (P2=XXXX), and limited capacity power (FOX=XX: XX). Please store the unplugged card properly.

5 Operation Display: During the operation of the energy meter, the display screen alternately shows the remaining power and total power consumption in the meter.

6. Overcapacity alarm: During the operation of the electric energy meter, if the "alarm indicator light" flashes rapidly, it warns the user that it has exceeded the capacity and reported power consumption; If the user is set to the over capacity power-off limit mode, after 30 seconds of over capacity power consumption, the switch will be turned off for 3 minutes and displayed in a countdown (180 seconds) to restore power supply; If the user inserts the card and responds, the power supply can be immediately restored.

7. Storage limit: If the purchased electricity+remaining electricity>stored electricity (10000 kWh), the purchased electricity will not be read in, and the display will show a "remaining limit" prompt, indicating that the stored electricity in the card is still valid.

8 Warning reminder: When the remaining battery level in the meter is less than twice the "alarm battery level", the "alarm indicator light" will flash (with an interval of 1 second) to remind the user to purchase electricity. At this time, if the user responds by inserting a card, the "alarm indicator light" will flash at an interval of 2 seconds to avoid power failure.

9 Power outage warning: If the user does not respond by inserting the card during the warning reminder, when the remaining power is the user's agreed alarm power (or 10% of the purchased power), the energy meter will trigger a power outage warning and display a "power outage" prompt. At this time, insert the IC card into the card slot once to restore power supply. If the IC card of this meter cannot be found after pulling the switch, you can borrow a neighbor's IC card to insert it and restore power supply.