Introduction to sepiolite

Sepiolite is a water-soluble magnesium rich silicate clay mineral with a layered chain structure, hardness of 2-3, light weight, and three basic characteristics of adsorption, rheological, and catalytic properties. It is widely used in more than 100 industries such as construction, plastics, ceramics, rubber, and textiles.

According to the hardness of sepiolite, its quality is brittle, and the impact crusher commonly used for ore shaping and crushing can fully meet its crushing needs. The sepiolite impact crusher is a specialized crushing equipment for sepiolite produced by DeEn Machinery. This equipment has been optimized based on traditional machines and is an updated product of traditional impact crushers.

Structure of sepiolite impact crusher

The structure of the sepiolite impact crusher is very simple, mainly consisting of the body part, rotor part, and two sets of impact plates.

1. The body is divided into upper and lower parts, connected by bolts, with several cast steel lining plates inside. The body is also equipped with several small doors, which are embedded with sealing rubber.

2. The rotor is fixed on a rotor shaft with a triangular pulley at one end, and a plate hammer that can be used on both sides is installed on the rotor.

3. The working face of the counterattack plate is fixed with a high manganese steel lining plate, and the gap with the plate hammer can be adjusted to form a discharge port.

Working principle of sepiolite impact crusher

When working, the motor starts and the triangular pulley drives the rotor shaft to start running, causing the rotor to move at high speed. During the process of entering the crushing chamber from the feeding port, sepiolite will touch the rotor and break under the high-speed impact of the rotor. It then rushes towards the counterattack plate at a rapid speed and is further crushed under the impact of the counterattack plate. After that, it bounces back to the plate hammer in the next crushing chamber and receives a new round of impact. After undergoing three chamber processing and mutual collision between the zeolite, the sepiolite is crushed to the desired particle size and discharged through the gap between the plate hammer and the impact plate.

Performance advantages of sepiolite impact crusher

1. Adopting the steel plate bending hot rivet process, the appearance of the machine has a more environmentally friendly concept, enhancing the structural strength and toughness of the equipment.

2. The spindle and rotor body are connected by a taper sleeve without a key, which is easy to disassemble and replace, and has overload protection function.

3. It has the functions of three-level crushing and shaping, so the crushing ratio is large and the product shape is cubic.

4. The required motor power for the drive system is relatively low, greatly reducing operating costs.

5. The use of a hydraulic adjustment system allows for easy adjustment of clearances through local operation buttons or remote control systems.

Overall, the sepiolite impact crusher produced by DeEn Machinery's sepiolite impact crusher manufacturer has the advantages of high production capacity, low operating costs, convenient adjustment, and easy control operation. It has gradually replaced traditional models on the market. Interested parties can consult by phone.

Technical Parameter