Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13179500501
Address

Shenhua Avenue, Jinhu County Industrial Park, Jiangsu Province

Contact Now

Segmented ultrasonic flow rate

The BY-CSB-4 segmented ultrasonic flow meter utilizes the principle of low voltage and multi pulse reception and transmission, and adopts patented tec

Contact Supplier

More Products

Product details

Segmented ultrasonic flow rate

The BY-CSB-4 tubular ultrasonic flowmeter utilizes the principle of low voltage and multi pulse reception and transmission, and adopts dual balanced signal differential transmission and reception patented technology and hardware independent design method; Produced through the use of internationally advanced large-scale integrated circuits and SMD mounting and soldering processes. Ensure that each factory flowmeter has the same performance. Flexible and versatile all Chinese display host (wall mounted F1 standard type, wall mounted F2 explosion-proof type, disk mounted S type, wall mounted FN network type) to meet various industrial sites; The pipe segment sensor solves the problem of signal attenuation and scaling on the inner surface of the pipeline due to long-term operation of the external clamp sensor, and the inability to receive signals. Suitable for various pipelines such as steel pipes, cast iron, fiberglass reinforced plastic, etc. Once launched, it gained recognition from a large number of users.

Pipe segment sensor

project		Performance/Parameters
Measurement Host	accuracy	1.0 %
	repeatability	0.2%
	flow rate range	0-64m/s
	Measurement period	500mS (2 times per second, 128 sets of data collected per cycle)
	measuring principle	Ultrasonic Time Difference Principle, 4-byte IEEE754 Floating Point Operation
	display interface	Can connect to 2 × 10 backlit Chinese characters or 2 × 20 character LCD displays
	operate	External 16 key touch keyboard and PC computer parameter software
	input	3-channel 4-20mA input is optional, with an accuracy of 0.1%. It can input signals such as pressure, liquid level, temperature, etc., and can also be used as a digital interface
		Two way three wire PT100 platinum resistor input circuit, capable of achieving heat metering function (enthalpy difference method)
	output	Current signal (optional module): 4-20mA, impedance 600 Ω floating, accuracy 0.1%. Frequency signal (optional module): Choose between 1-9999Hz, OCT output. Pulse signal: positive, negative, net flow and heat accumulation pulses, dual OCT output (with one pulse width programmable between 6-1000ms, default 200ms). Alarm signal: Dual OCT output, with up to 20 selectable source signals. Data interface: Isolated RS485 serial interface.
	Communication protocol	MODBUS protocol, MBUS protocol, FUJI extension protocol, it is recommended to use MODBUS-RTU protocol or MODBUS-ASCII protocol
	Other functions	Automatically remember the accumulated traffic and work status of the previous 512 days, 128 months, and 10 years; Automatically remember the first 30 power on/off times and flow rate, and can achieve automatic or manual replenishment; Programmable quantitative controller (can be started using external input signals or MODBUS commands); One bidirectional serial interface can connect multiple external devices such as 4-20mA and data loggers; The working parameters can be fixed in the FLASH memory inside the machine and automatically retrieved when powered on; Users can upgrade software by sending code files via email Fault self diagnosis function. Fault time timer.
	Working current	50mA (without connecting keyboard display and buzzer not sounding)
	Spare battery	Using CR2032, maintain 100000 hours of data without loss under 24VDC power outage conditions
	ambient temperature	-10 ℃~70 ℃ (please contact the manufacturer if the temperature range exceeds this requirement)
	working hours	continuous
	Version number	UFT12	UFT13	UFT14	UFT15
	Power Supply	24VDC	8~30VDC	24VDC	85~264VAC/24VDC
	Size (mm)	Φ84	116×62	92×36	150×95
sensor	External binding type	Standard S1 type, suitable for pipe diameter DN15-100mm Standard M1 type, suitable for pipe diameter DN50-800mm Standard L1 type, suitable for pipe diameters ranging from DN300 to 6000mm High temperature S1H type, suitable for pipe diameter DN15-100mm High temperature M1H type, suitable for pipe diameter DN50-1000mm Sensors from other manufacturers
	plug-in	The material of the measuring pipeline is not limited (for non-stop installation) and is suitable for pipes with a diameter of DN80 or above.
	Pipe section type	π - type pipe segment type: suitable for pipe diameters of DN25-DN40, with a measurement accuracy of ± 0.5% for the entire machine Standard pipe section type: suitable for pipe diameters of DN50 to DN1000, with a measurement accuracy of ± 0.5% for the entire machine
	signal cable	Special SEYV75-2 shielded twisted pair cable, factory standard 5-meter, can be extended up to 500 meters for specific occasions (not recommended).
	protection grade	IP68 (capable of working in water immersion)
Measurable pipeline	Pipe	Steel, stainless steel, cast iron PVC、 Copper, aluminum, cement pipes, and other materials with dense texture are allowed to have lining.
	Lining material	Epoxy asphalt, rubber, mortar, polypropylene, polystyrene, polyester, polyethylene, hard rubber, rubberwood, polytetrafluoroethylene.
	inside diameter	15mm~6000mm (the inner diameter of the π - shaped pipe segment can be as small as 2mm)
	Length of straight pipe section	Upstream ≥ 10D, downstream ≥ 5D, distance from pump outlet ≥ 30D.
Measurement medium	Types	Water, seawater, acidic and alkaline liquids, food oil, gasoline, coal, diesel, crude oil, alcohol, beer, and other uniform liquids that can propagate ultrasonic waves.
	Turbidity	≤20000 ppm， The sewage measurement effect is good, and the vast majority of sewage pipelines can be stably measured.
	Temperature	-40℃～160℃
	flow to	It can measure the forward and reverse flow separately and measure the net flow.

Dimensions and wiring diagram

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content