Purpose and Scope of Application

The SZX-C66 vibration meter is a handheld vibration measuring instrument used to measure various rotating mechanical vibrations, which can be used for vibration detection and simple fault analysis. This instrument is suitable for vibration detection in industrial sectors such as power, petroleum, chemical, and metallurgy.
Functional Features

1. It can measure the root mean square value of vibration velocity, peak to peak displacement, and half peak acceleration,
So as to meet various vibration measurement needs.
2. After entering the center frequency of the tested device, the amplitude frequency information can be displayed by pressing the button.
3. After entering the center frequency of the tested device, you can operate the buttons to see the simple fault analysis results.
4. The instrument adopts a 128 × 96 dot matrix LCD display.
5. After the battery is fully charged, it can work continuously for more than 5 hours.

Specification

1. Measurement range: Vibration displacement (P-P): 1-1000 μ m

Vibration velocity (RMS): 0.1-70.7mm/s
Vibration acceleration (O-P): 0.1-30m/s2

2. Frequency response:

A、 When using an accelerometer:
Acceleration: 0.5-1kHz
Intensity: 12-1kHzB

Using a magneto electric speed sensor:
Intensity: 12-11kHz
Displacement: 12-11kHz
Error: ≤ ±5%
Displacement: 12-1kH

3. Amplitude linear error: Vibration displacement (P-P): ≤± 5%
Intensity (RMS): ≤± 5%
Acceleration (O-P): ≤± 5%
4. Usage environment: Environmental temperature:- 10 ～ 50℃
Relative humidity: ≤ 80%
Atmospheric pressure: 75-106kPa
5. Communication interface: USB interface
6. Size: 165×65×30mm
7. Weight: 500g (including battery and sensor)