SWP-LED series single loop digital/light column display controller-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

17th Floor, Dongchang Building, 8 Cotton Tree Drive, Central, Hong Kong

Contact Now

SWP-LED series single loop digital/light column display controller

Contact Supplier

More Products

Product details

instrument for drawing circles check		speak bright
use environment	ambient temperature	0~50℃
	relative humidity	≤85RH Avoid strong corrosive gases
	Supply Voltage	Conventional AC220V+10-15% (50Hz ± 2Hz) Special type AC85~260V - Switching Power Supply DC24V ± 2V - Switching Power Supply
	power consumption	≤6W
input signal	analog quantity	Thermocouples: Standard thermocouples - B, S, K, E, J, T, WRe3-25, etc
		Resistance: Standard thermistor - Pt10, Pt100.1, Cu50, Cu100 and other remote pressure resistors, etc
		Current: 0~10mA, 4~20mA, 0~20mA, etc. - Input impedance ≤ 250 Ω
		Voltage: 0~5V, 1~5V, mV, etc. - Input impedance ≥ 250K Ω
	Switching quantity	Pulse signal: waveform - rectangular, sine or triangular wave Radiance - greater than 4V (or as per user requirements) Scope -0~10KHz (or as per user requirements)
		Contact signal: electrical contact input signal
output signal	analog output	DC 0~10mA (load resistance ≤ 750 Ω) DC 4~20mA (load resistance ≤ 500 Ω) DC 0~5V (load resistance ≥ 250K Ω) DC 1~5V (load resistance ≥ 250K Ω)
	Switching Output	Relay control output - relay ON/OFF return differential. AC 220V/3A DC 24V/5A (resistive load) Controllable silicon control output - SCR (thyristor zero crossing trigger pulse) output, 0.5A/400V Solid state relay output - SSR (Solid state relay control signal) output, 6~24V/30mA (voltage not adjustable) Bidirectional thyristor output - SOT thyristor output, 5A/400V
	Communication output	Interface Method - Standard Serial Bidirectional Communication Interface RS-485 RS-232 C, RS-422, etc Baud rate -300~9600Bps instrument internal free setting
	Feed output	DC 24V load ≤ 30mA
measurement accuracy		± 0.2% FS ± 1 word or ± 0.5% FS ± 1 word
resolution		± 1 word
measuring range		-1999~9999 words
Display mode		-1999~9999 word measurement value display -1999~9999 character setting value display, LED working status display
way		control/The alarm method is to bring back the upper or lower limit alarm of the difference (which can be freely set by the user)
Control accuracy		± 1 word
temperature compensation		0~50 ℃ digital temperature automatic compensation
Print Control		You can choose to directly connect various types of string printers(such as LQ-300K, TPuP series micro printers, etc.), with a printing interface of RS-232C
Printing accuracy		Same instrument accuracy
Parameter setting		Panel touch sensitive button settings, parameter settings permanently saved after power failure, parameter settings password locked
Protection method		Input circuit disconnection alarm(When thermocouple or resistor input), relay output status LED indication, input over/under range alarm Power undervoltage automatic reset, abnormal operation automatic reset (Watch Dog)

★SWP-LED series digital display control instrument type chart

typename	take the place of a sign or object indicating number										speak bright
SWP-	□	□	□□	-□	□	-□□	-□	□	-□	□	LEDSeries digital display controller
Appearance characteristics	C S										Horizontal display instrument^1 Vertical display instrument^1
External dimensions	1 4 7 8 9										48×48mm 96×48mm(Horizontal),48×96mm(Vertical) 72×72mm 160×80mm(Horizontal), 80×160mm(Vertical) 96×96mm
Control function	01 03 04										Measurement display Three position control Four limit control or four limit alarm output
Communication method	□										See also“Communication method”
Output	□										See also“Control output mode”
Input Type	□□										See also“Input Type”
The first alarm method	N H L										No alarm (can be omitted) Upper limit control/Alarm (four limit control)/call the police2H）^2 Lower limit control/Alarm (four limit control)/call the police2L）^2
Second alarm method	N H L										No alarm (can be omitted) Upper limit control/Alarm (four limit control)/call the police2H）^2 Lower limit control/Alarm (four limit control)/call the police2L）^2
Feed output	P										DC24VFeed output
Power supply mode	W T										DC24Vpower supply AC85-260VPower Supply (Switching Power Supply) AC220VPower supply (linear power supply, can be omitted)^*3

★SWP-LED series light column measurement display control instrument type chart

type name	take the place of a sign or object indicating number										speak bright
SWP-	ST□	□□	-□	□	-□□	-□	□	-□	-□	-□	Light column display measuring instrument
External dimensions	8										160×80mm(Horizontal), 80×160mm(Vertical)
Control function	01 03 04										Measurement display Three position control Four limit control or four limit alarm output^*2
Communication method	□										See also“Communication method”
Output	□										See also“Transmission output mode”
Input Type	□□										See also“Input Type”
The first alarm method	N H L										No alarm (can be omitted) Upper limit control/Alarm (four limit control)/call the police2H）^2 Lower limit control/Alarm (four limit control)/call the police2L）^2
Second alarm method	N H L										No alarm (can be omitted) Upper limit control/Alarm (four limit control)/call the police2H）^2 Lower limit control/Alarm (four limit control)/call the police2L）^2
Feed output	P										DC24VFeed output
Power supply mode	W T										DC24Vpower supply AC85-260VPower Supply (Switching Power Supply) AC220VPower supply (linear power supply),Can be omitted)
Power supply mode	X										Horizontal display Vertical display (can be omitted)

★ pour1：C80、C90The series is0.8inchLEDDisplayS80、C70、C40The series is0.56inchLEDdisplay, C10The series is0.32inchLEDDisplay.

★ pour2Four limit control or four limit alarm output is controlled by four relays,Users can modify internal parameters to set desired control or alarm modes.(Four limit control/Alarm onlyT.C80、S80andC90Series provided,2HRepresenting two upper limit controls/call the police,2LRepresenting two limit controls/call the police) .

★ pour3Light column display controllerSWP-ST803-01-23-HL-X(Horizontal Table)“S”Can be omitted).

★ Communication method:

code	0	2	3	4	8	9
Communication method	No communication	RS-232	lpt	RS-422	RS-485	Special specifications

★ Communication protocol: SWP communication protocol is used at the factory.

If the user has ordered a special communication protocol, please indicate it when placing the order.

When selecting instruments with printing ports, some instruments cannot meet the printing function. When ordering, choose instruments that can meet their requirements in terms of functionality.

★ Control output mode:

Selection code	0	1	2	3	4	5	6	7	8	9
Output	no-output	relay	4~20mA	0~10mA	1~5V	0~5V	SCR output	SSR output	Special specifications	SOT output

SCR thyristor zero crossing trigger pulse output SSR solid-state relay control output SOT bidirectional thyristor output

★ Transmission output mode:

Selection code	0	2	3	4	5	8
Output	no-output	4~20mA	0~10mA	1~5V	0~5V	Special specifications

★ Input type:

code	Input Type	measuring range	code	Input Type	measuring range	code	Input Type	measuring range
01	B	400~1800℃	09	Pt100.1	-199.9~320.0℃	17	30~350Ω	-1999~99999 d
02	S	0~1600℃	10	Cu50	-50.0~150.0℃	18	Special specifications	User to be determined
03	K	0~1300℃	11	Cu100	-50.0~150.0℃	19	4-20mA square meter	-1999~99999 d
04	E	0~1000℃	12	4~20mA	-1999~99999 d	20	0-10mA square root	-1999~99999 d
05	T	-199.9~320.0℃	13	0~10mA	-1999~99999 d	21	1~5V square root	-1999~99999 d
06	J	0~1200℃	14	1~5V	-1999~99999 d	22	0~5V square root	-1999~99999 d
07	WRe3~25	0~2300℃	15	0~5V	-1999~99999 d	23	Fully switchable input
08	Pt100	-200~650℃	16	0~20mA	-1999~99999 d

★ Note: To switch inputs, only the secondary parameters of the instrument need to be set. For detailed information, please refer to the "User Manual".

Note 3: C70 and C10 have no frequency signal input. Factory default switch power supply.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content