ST-S206 high-precision load curve instrument

DESCRIPTION：

The fully automatic button and switch load displacement curve meter is mainly suitable for various buttons and switches(load-Conduction-trip)Curve testing, utilizingWindowsThe Chinese window is set in writing, with simple and convenient operation, and all data can be stored (test conditions, load curve graphs, test results, inspection reports, etc.).

High precision load curve instrumentThis machine has high-precision motor transmission, which can provide high-precision(load-Conduction-trip)Measure and obtain completely accurate key and switch curve tests.

Technical parameters:

1. Determination of maximum load: 2kg, 5kg, 10kg (optional set)

2. Minimum resolution: 0.01gf

3. Maximum measuring distance: 150mm

4. Minimum displayed travel: 0.01mm

5. Measurement speed range: 0-300mm/min

6. Machine transmission mechanism: ball screw

7. Machine driver: Drive motor

8. Machine size: 440 * 340 * 560 (W * D * H) mm

9. Machine weight: 31kg

10. Power supply: 220V

11. Dynamic conductivity function: 0-3000m Ω

Main functions:

The testing conditions can be set by the computer and can be stored. Select settings from the drop-down menu or enter data directly. (including test category, measured direction of motion, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, waiting position per time, and number of air compressions).

Peak, Bottom, rPeak, rBottom, Distance, and Click can all be displayed directly on the graph without the need for manual calculation;

The measurement curve chart is memorized by the computer and can be enlarged or reduced at any time. One A4 paper can be used to place 24 curve charts at will;

The test items can input upper and lower limit specification values, and the measurement results can be automatically judged as OK or NG;

Known travel can test the corresponding load and resistance, or known load can test the corresponding travel and resistance;

After testing, the life curve of load attenuation can be exported;

※ The load vernier and resistance vernier can check the load and resistance at any position on the curve at any time;

The test data is stored on the hard drive (each piece of data can be stored for an unlimited number of times);

The header content of the inspection report can be modified at any time (in both Chinese and English);

The inspection report can be automatically generated without the need for further input;

The inspection report can be converted into document report formats such as Excel, Word, PDF, etc;

During the testing of load and stroke, the dynamic on resistance function can also be tested;

productcharacteristic:

1. Instrument overload protection;

2. Emergency stop device, upper and lower travel limit device;

3. Maximum limit protection for software parameter settings;

Interface:

Interface diagram of the main operating platform after opening the software package:

​