ST-S205 Fully Automatic Load Curve Meter

Functional purpose:

The fully automatic button and switch load displacement curve meter is mainly suitable for testing the (load stroke) curve of various buttons and switches, using WindowsWritten settings in Chinese window, easy and convenient to operate, and all data can be stored (test conditions, load curve graphs, test results, inspection reports, etc.).This machine has high-precision motor transmission, which can provide high-precision(Load stroke) measurement, and the ability to obtain completely accurate button and switch curve tests.

Technical parameters:

1. Determination of maximum load: 2kg, 5kg, 10kg, 20kg (optional set)

2Minimum Resolution:0.01g

3. Maximum measuring stroke: 100mm

4. Minimum displayed travel: 0.01mm

5. Measurement speed range: 0-300mm/min

6. Machine transmission mechanism: ball screw

7. Machine driver: Drive motor

8. Machine size: 300 * 270 * 500 (W * D * H) mm

9. Machine weight: 31kg

10ElectricitySource: 220V

Main functions and features:

The testing conditions can be set by the computer and can be stored. Select settings from the drop-down menu or enter data directly. (including test category, measured direction of motion, load measurement range, stroke measurement range, stroke origin position, stroke origin detection, measurement speed, total number of measurements, pause time, waiting position per time, and number of air compressions).

※Peak 、Bottom、rPeak、RBottom, Distance, and Click can directly display values on the graph without the need for manual calculation;

The measurement curve chart is memorized by the computer and can be enlarged or reduced at any time. One A4 paper can be used to place 24 curve charts at will;

The test items can input upper and lower limit specification values, and the measurement results can be automatically judged as OK or NG;

Known travel can test the corresponding load, or known load can test the corresponding travel;

After testing, the life curve of load attenuation can be exported;

※ The load vernier and resistance vernier can check the load at any position on the curve at any time;

The test data is stored on the hard drive (each piece of data can be stored for an unlimited number of times);

The header content of the inspection report can be modified at any time

The inspection report can be automatically generated without the need for further input;

The inspection report can be converted into document report formats such as Excel, Word, PDF, etc;

During the testing of load and stroke, the dynamic on resistance function can also be tested;