SS-LDHL-2 series high-speed blown film machine-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

13566166060
Address

No. 2, Building 2, Jingye Road, Dongshan Economic Development Zone, Rui'an City, Zhejiang Province

Contact Now

SS-LDHL-2 series high-speed blown film machine

Contact Supplier

More Products

Product details

Purpose: This unit is suitable for blowing high-density polyethylene (HDPE), low-density polyethylene (LDPE), and linear low-density polyethylene (LLDPE) plastic films, and is widely used for packaging household and industrial products such as food, clothing, textiles, and daily necessities

Instructions for use

1. Check that the temperature self-control is intact, the heating appliances are intact, and pay attention to timely adjusting the heating temperature at each point within the specified range.

2. Check the traction speed and control the film thickness

Observe and adjust the uniformity of the film thickness, and ensure that the bending diameter meets the standard.

4. Check the pressure of the air storage cylinder, it should not be too high, but there should be a backup pressure.

5. Check and control the proportion of raw materials and mix them evenly.

⒍ Check for impurities in the raw materials, especially by promptly using a magnet to check for any iron mixed in.

7. Check the lubrication condition of the gearbox position and air compressor cylinder lubricating oil.

Regularly check the temperature rise and mechanical transmission of each operating motor.

Main technical parameters:

model	SS-45HL600	SS-50HL800	SS-60HL1000
screw diameter	Φ45mm	Φ50mm	Φ60mm
screw length-to-diameter ratio	30:1	30:1	30:1
screw speed	10—150rpm	10—150rpm	10—150rpm
Main motor power	15KW	18.5KW	30KW
Maximum extrusion capacity	45kg—70kg/h	50kg—80kg/h	110kg/h
Mold specifications	Φ50mm	Φ80mm	Φ100&220mm
Film thickness single-sided	0.008—0.08mm	0.008—0.08mm	0.008—0.12mm
Maximum bending diameter of thin film	100-600mm	200-800mm	300-1000mm
machine weight	2.5t	3t	3.5t
Overall dimensions	480022005500mm	500024005500mm	550026005800mm

model	SS-65HL1000	SS-75HL1500
screw diameter	Φ65mm	Φ75mm
screw length-to-diameter ratio	30:1	30:1
screw speed	10—150rpm	10—150rpm
Main motor power	37KW	55KW
Maximum extrusion capacity	90kg—120kg/h	100kg—150kg/h
Mold specifications	Φ120&250mm	Φ150&350mm
Film thickness single-sided	0.008—0.12mm	0.008—0.12mm
Maximum bending diameter of thin film	400-1200mm	500-1500mm
machine weight	6t	8t
Overall dimensions	550028006200mm	680026006500mm

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content