VIP member
SGEP-300 Continuous Monitoring System for Smoke Emissions
The SGEP-300 continuous monitoring system for flue gas emissions is a flue gas online monitoring system independently developed by our company to meet
Product details
Product Introduction:
The SGEP-300 continuous monitoring system for flue gas emissions is a flue gas online monitoring system independently developed by our company to meet the requirements of relevant national atmospheric emission standards, combined with the actual situation on site in China (low temperature, high humidity, high corrosion).
Mainly used for treating particulate matter in flue gas SO2、 Dynamic continuous monitoring of pollutants such as NOx, as well as monitoring of other parameters such as oxygen, temperature, pressure, flow rate, humidity, etc. Through a data acquisition and processing system, charts are generated and the monitoring data is transmitted remotely to environmental protection departments at all levels in accordance with the HJ212 national standard communication protocol, thereby achieving remote continuous monitoring of the flue gas emission process.
Detection principle:
Product features:
1. All parts in contact with smoke are made of heat-resistant and corrosion-resistant special stainless steel, polytetrafluoroethylene and other materials;
2. Adopting heated direct sampling and high-temperature heat tracing transmission to avoid condensation of flue gas, the measurement is more representative;
3. Special preprocessing system.
- Efficient dehydration condenser, outlet Td ≤ 5 ℃, in compliance with HJ76 standard;
- SO2Loss of quantitative measurement;
- Acid compensation SO2lose.
4. Real time dew point alarm avoids analysis deviation caused by moisture condensation and corrosion of the analysis system.
5. The particulate matter adopts the extraction laser forward scattering method, which is suitable for measuring particulate matter in high humidity and low concentration environments;
6. Equipped with automatic zero calibration function.
7. Dual range automatic switching function.
8. Multi channel analog input/output function.
9. Easy to operate, fast to set up, easy to run, low maintenance workload, and low cost.
Technical parameters:
Application areas:
Used for particulate matter in flue gas emissions from pollution sources such as thermal power, steel metallurgy, cement, chemical, industrial boilers, industrial kilns, and waste incinerators SO2、 Dynamic continuous monitoring of NOx, as well as control monitoring of flue gas desulfurization, denitrification systems, and dust removal systems.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-