1.1 S888 Electric Control Lock Product Introduction

1、The electronic cabinet lock is mainly composed of two parts: the lock hook and the lock body. When installing, please pay attention to adjusting the appropriate contact between the lock hook and the lock body, and it is best to be smooth and flexible.

2There are red and black SM2P female terminals and blue and white SM2P male terminals protruding from the tail of the cabinet lock, where the red and black wires are the power line terminals of the electric lock, and the positive and negative poles are not separated; The blue and white terminals are the door status detection lines, with no distinction between input and output.

1.2 parameter

1. Working mode: Adopting the working mode of closing the door (power-off) and locking, and instantly triggering unlocking when powered on (12V), suitable for various intelligent signal additional uses!

2. Specifications and dimensions:Weight: 160g, size: 59 * 80 * 13.5mm;

3. Emergency unlocking: The lock body hides an emergency unlocking method!

4. Energy saving: The instantaneous power on time for unlocking is less than 1 second, and it does not consume electricity when closing and locking the door normally!

5. Material saving: The ultra-thin design not only saves raw materials, but also provides larger and more flexible layout space for the production of objects such as boxes and cabinets!

6. Long lifespan: 300000 aging tests can ensure that the coil will never burn out!

7. Status output: equipped with a lock status output detection signal, used to detect the (open, closed) working status of the door.

8. Installation method: It can be installed on the wall surface or embedded or hidden!

1.2 installation drawing

Attention: The working mode of this cabinet lock is instant power on triggering unlocking(=< 1second)，

Continuous power on5The coil is prone to burning out in seconds!