product overview
Developed jointly by the Norwegian Institute of Meteorological Sciences and the Norwegian Survey and Design InstituteThe T-200B series rain and snow gauge produced by Geonor is a high-performance product.
It can record both real-time precipitation and precipitation at certain time intervals. StandardT-200B has a rain gauge with a capacity of 600mm, while T-200BM and T-200BMD have rain gauges of 1000mm and 1500mm respectively, ensuring long-term heavy rainfall measurement. The rain gauge can be equipped with up to 3 sensors at the same time and equipped with windproof guardrails to ensure the accuracy and reliability of the measuring equipment. The T-200B comes with one sensor as standard.
The precipitation is collected in a snow gauge container, weighed by a string vibration load sensor, and then output a frequency. This frequency is a function of voltage, which can be used to calculate rainfall.
This frequency is recorded in the form of a square wave signal and can be easily transmitted.The conversion module provided by Geonor also enables easy integration into various data collection systems. The entire system has no movable parts, greatly reducing system errors.
The rain gauge is equipped with an external device that meets the requirements of the World Meteorological Organization(The area of WMO is 200cm2The collection bucket for the rainwater inlet. pass throughThe conversion module provided by Geonor, T-200B, can easily integrate with Campbell's CR series data collectors. This product uses antifreeze instead of a heater to ensure the normal operation of the equipment in low-temperature environments, which can prevent the impact of water evaporation on measurement data and reduce energy consumption. Due to its simplicity, ease of use, and low energy consumption, T-200B is highly suitable for outdoor use in areas that can only be powered by solar energy.
Technical Parameter
parameter
T200B
T200BM
T200BMD
capacity
600mm
1000mm
1500mm
Collection area
200 cm2
repeatability
0.1 mm
0.1 mm
0.15 mm
sensitivity
0.05 mm
0.075 mm
0.1mm
accuracy
0.1% FS
temperature range
-40℃~60℃
temperature drift
0.001% FS/℃
material
aluminum alloy
size
Diameter 390 mm, High 760 mm (600mm capacity)
Diameter 390 mm, High 800 mm (1000mm capacity)
Diameter 390 mm, High 1000 mm (1500mm capacity)
install
Three points fixed on a horizontal base
Note:
The default configuration includes one weighing sensor, and up to three sensors can be configured.
If you need to know more about the product details, you can contact the sales personnel of Xi'an Saimo Rui Environmental Technology Co., Ltd. The contact information can be found at the bottom of the website.
