RGX-250RGX-250 Artificial Climate Incubator Constant Temperature and Humidity Chamber Details:

Brief introduction：

Artificial climate incubatorIt has the functions of refrigeration, heating, lighting, and humidification systems, and controllable temperature and humidity. It is an indispensable laboratory equipment for scientific research and education departments in plants, biology, microbiology, genetics, viruses, medicine, and environmental protection. Widely used in low-temperature constant temperature testing, cultivation testing, environmental testing, and so on. Its main features are:

1、Artificial climate incubatorThe microcomputer temperature and humidity controller has reliable temperature and humidity control accuracy, and has functions such as over temperature, leakage, power outage, and sensor fault alarm.

2、Artificial climate incubatorImported fluorine free refrigeration compressors and circulating fans are used for forced convection air circulation, with high efficiency, low energy consumption, low noise, uniform temperature distribution, and long service life.

3、Artificial climate incubatorAdopting a mirror stainless steel inner liner, the corners are easy to clean, and the spacing between the shelves inside the box is adjustable.

4External high-precision and large capacity humidity generator ensures fast humidity control, high accuracy, small fluctuations, and convenient addition of distilled water.

5Equipped with an independent temperature limit alarm system, it automatically interrupts when the temperature limit is exceeded, ensuring safe operation of the experiment and preventing accidents (optional).

6ConfigurationRS485Interface, capable of recording changes in temperature and humidity parameters (optional).

7、Artificial climate incubatorThe box door is equipped with an observation window, and there are lighting fixtures inside the box for easy observation of the culture inside. A dual door structure can also be selected, and the inner door is made of fully tempered glass.

8、Artificial climate incubatorInstall a test hole on the left side of the box for easy experimental operation and temperature measurement (optional).

LCD screenArtificial climate incubatorIn addition to the above functions, it also has a novel appearance, simple operation, built-in humidifier, programmable control, and can be equipped with a built-in printer.

2、 Technical indicators:

All technical data are under no-load conditions, with an ambient temperature of 25 ℃, a relative humidity of 50% RH, and a voltage of ± 10%. Our company may change the above technical specifications at any time. We apologize for any errors in product appearance caused by photography or printing. Our company reserves the right of final interpretation.

If you need to customize special technical parameter requirements, you can contact our customer service for consultation. Our company has a long-term commitment to customized products.

3、 Instructions for use:

The incubator should be placed in a clean, tidy, dry, and ventilated workspace; Before use, all control switches on the panel should be in a non working state; Place the test samples on the cultivation rack, and maintain an appropriate distance between each test bottle (or vessel) to facilitate the circulation of hot (cold) air convection; Connect the external power supply, place the power switch in the "on" position, and the indicator light will turn on; Select the cultivation temperature;

1.Adjust the temperature and humidity to the desired level, and display the desired set temperature and humidity digitally. Please strictly follow the instructions of the temperature controller to set the temperature and humidity.

2.The actual temperature inside the working chamber is displayed digitally. If the ambient temperature is lower than the set temperature for heating. The incubator will automatically heat up, and if the ambient temperature is higher than the set temperature, the incubator will automatically cool down.

3.Observe the lighting switch inside the working chamber. After the work is completed, set all control switches to non working state and cut off the power supply.

4.When using the humidifier, plug the humidifier power cord into the power interface on the right side of the incubator, and turn on the humidifier switch

4、 Main configuration:

Constant temperature and humidity incubator1Desk, humidifier1Platform, drainage pipe1strip

5、 Attention:

1To prevent pollution, condensation of water droplets on the walls of the working chamber should be avoided as much as possible during low-temperature use.

2Not applicable to the cultivation of items containing volatile chemical solvents, low concentration explosive gases, low ignition point gases, and toxic substances.

3Proper use and maintenance of the incubator (such as appropriate ambient and working temperatures; effective heat dissipation of exposed refrigeration compressors and wire tube condensers) can prolong its service life.

4When the refrigeration system is working, unless necessary for testing, frequent opening of the box door should be avoided, which is beneficial for maintaining temperature stability and preventing dust and dirt from entering.

5After the refrigeration system stops working, if there is a malfunction or difficulty, our company will continue to provide high-quality services and assist in handling it.

6、 After sales service

1Our company provides after-sales service, maintenance, repair, replacement, technical support and other services for instruments.

2The warranty period for the instrument shall be at least24For repairs beyond the warranty period, only material fees will be charged.

3During the warranty period, our company is responsible for maintaining the instruments provided by them at no additional cost.

4Our company is12Provide substantial response to maintenance requirements provided by users within hours and offer emergency strategies.

5Beyond the warranty period, lifetime maintenance is provided.

6For instruments that require installation and debugging, our company is responsible for installation and debugging, and provides on-site free training for specific operators to enable them to master the use and maintenance of the instruments.

7If there are any problems with the entire machine or components during the installation and debugging process of the instrument, our company is responsible for repairing and replacing them. For serious quality problems, we are responsible for replacing the entire machine.