RFID ultra-high frequency long-distance vehicle weighing management card readerUR5206 is a high-performance UHF deviceUltra high frequency electronic tag all-in-one machine，Reading distance: 0-7 meters，card readerSupport multiple working modes such as automatic mode, interactive response mode, trigger mode, etcCard readers are widely used inparking lot managementMining carWeight ManagementMultiple wireless radio frequency identification (RFID) systems, including non-stop toll collection, automatic sorting line recognition, logistics, access control systems, anti-counterfeiting systems, and production process control.

Characteristics of RFID ultra-high frequency long-distance vehicle weighing management card reader

Supporting protocols: ISO18000-6B, EPC CLASS1 G2;

card readerOperating frequency: 902-928MHz (can be adjusted according to the requirements of different countries or regions);

Output power: up to 30dBm (adjustable);

card readerReading distance: 0-7 meters *;

Operate in broad-spectrum frequency hopping (FHSS) or fixed frequency transmission mode;

Support multiple working modes such as automatic mode, interactive response mode, trigger mode, etc;

Low power design, powered by a single+9V power supply;

card readerSupport multiple user interfaces such as RS232, RS485, Wiegand, etc;

Provide dynamic link libraries (DLLs) and demonstration software source code, supporting secondary development;

*Effective distance and protocol format are related to external antennas, electronic tags, and working environment.

RFID ultra-high frequency long-distance vehicle weighing management card reader interface parameters

card readerDB9 pin interface: Red:+9V; Black: GND; Huang: Weigen DATA0; Blue: Wigan DATA1; Brown: GND; Purple: RS485 R+; Orange: RS485 R -; White: RS232 RXD; Green: RS232 TXD; Gray: External trigger (TTL level).

Development parameters of RFID ultra-high frequency long-distance vehicle weighing management card reader

Instruction set: Provides a C language instruction set;

Demo: Provide C # Delphi demonstration software and source code;

Dll library: provides C # VB libraries and library descriptions;

card readerFirmware upgrade: supports personalized firmware development, customization, and upgrading;

Mobile operation: Supports on-site device inspection and diagnosis on mobile devices (optional).

RFID ultra-high frequency long-distance vehicle weighing management card reader RF parameters

card readerInterface protocol: EPCglobal UHF Class 1 Gen 2/ISO 18000-6C ISO 18000-6B;

Operating frequency: 860~868MHz/902~928MHz (can be adjusted according to the requirements of different countries or regions);

card readerOutput power: 0-30 dBm;

Output power accuracy:+/-1dB;

Receiving sensitivity:<-85=''>

RFID ultra-high frequency long-distance vehicle weighing management card reader reads parameters

Built in antenna; Built in 8dbi circularly polarized antenna;

card readerPeak value of label inventory; Peak label query speed>50 sheets;

Read distance; 0-7 meters depending on different parameters and performance of tags and antennas.

Physical characteristics of RFID ultra-high frequency long-distance vehicle weighing management card reader

Size: 235mm × 235mm × 45mm;

Weight: 900g;

Working humidity:<95%='' @='' 25='' ° C=''>

Working temperature: 20 ° C -+55 ° C;

Storage temperature: 20 ° C -+85 ° C;

card readerElectrical characteristics

Power supply voltage: DC9V, maximum 12.6V;

Working current: 0.35A, maximum 0.65A;

RFID ultra-high frequency long-distance vehicle weighing management card reader related products:

RFID ultra-high frequency quad core Android system PDA MT7, based on quad core Android system, optional barcode (one-dimensional or two-dimensional), RFID high frequency (NFC), ultra-high frequency (902-928MHz IMPINJ R2000 module, combined with 5.2-inch high-definition IPS capacitive touch screen, 1920 * 1080 resolution, standard configuration Blue Tooth 4.0, WIFI 2.4G/5G dual band, 4G, GPS. It can be widely used in various mobile work scenarios such as tool search, equipment inspection, book and file inventory, anti-counterfeiting traceability, clothing inventory, industrial washing, etc. Wireless Radio Frequency Identification (RFID) systems.

The RFID Ultra High Frequency (UHF) large screen explosion-proof handheld terminal MT6 adopts a 6.0-inch IPS high brightness large screen with a resolution of up to 2160 * 1080, based on an 8-core 2.0GHz high-performance processor, combined with the Android (periodically upgraded) system, equipped with 4GB RAM and 64GB ROM large memory. The ultra-high frequency is deeply developed using the IMPINJ R2000 high-performance chip, with a recognition distance of up to 7 meters and equipped with 6000mAh+4000mAh lithium batteries. The ultra long battery life meets various high load applications. It can be widely used in various wireless radio frequency identification (RFID) systems such as intelligence, management, equipment inspection, book and archive inventory, management, anti-counterfeiting traceability, product quality inspection, aviation ticketing, water and electricity meter reading, animal husbandry management, service ordering, mobile sales operations, etc.

The RFID Ultra High Frequency (UHF) Android MT50A is equipped with an 8-core 2.0GHz high-performance processor, combined with the Android (periodic upgrade) system. It is equipped with 2GB RAM and 16GB ROM memory, as well as a 5.5-inch IPS high brightness screen. Optional barcode (one-dimensional or two-dimensional), RFID low-frequency (125KHz), high-frequency (13.56MHz), and (902-928MHz) high-performance modules are also available. All six sides can withstand the impact of falling from a height of 1.5 meters to a cement floor, with an IP rating of up to IP65. It can be widely used in various wireless radio frequency identification (RFID) systems such as logistics and express delivery, equipment inspection, medical care, anti-counterfeiting traceability, product quality inspection, water and electricity meter reading, clothing ordering, mobile sales operations, etc.

The RFID ultra-high frequency split type electronic tag reader UR6258 is a high-performance UHF ultra-high frequency electronic tag reader developed based on the IMPINJ R2000 chip. It supports EPCglobal UHF Class 1 Gen 2/ISO 18000-6C ISO 18000-6B protocol, RS232, RJ45 (TCPIP) and other communication interfaces, as well as 4 external TNC antenna interfaces,card readerWidely used in various wireless radio frequency identification (RFID) systems such as inbound and outbound warehouse management, library management, weighing management, logistics sorting, container, intelligent transportation, access control systems, anti-counterfeiting systems, etc.

The RFID ultra-high frequency desktop USB interface card issuer UR5002 is a high-performance UHF band ISO18000-6C (EPC C1G2), ISO18000-6B multi protocol card issuer, widely used in various wireless radio frequency identification (RFID) systems such as electronic tag information input, IC card issuance, vehicle card registration, member management, warehouse tag input, personal identification, conference sign in system, access control system, anti-counterfeiting system, and production process control.

The UR5306 ultra-high frequency card reader is a high-performance UHF ultra-high frequency electronic tag that combines proprietary efficient signal processing algorithms to achieve fast reading and writing processing of electronic tags while maintaining high recognition rates. It is widely used in various system application fields such as industrial production lines, mold management, tool management, AGV positioning, anti-counterfeiting traceability, logistics sorting, and production process control.

The RFID ultra-high frequency UHF circularly polarized antenna UA2626 is a high-performance electronic tag antenna with a working frequency of 902-928MHz, supporting EPCglobal UHF Class 1 Gen 2/ISO 18000-6C ISO 18000-6B protocol.card readerIt can be widely used in various wireless radio frequency identification (RFID) systems such as warehouse entry and exit management, intelligent bookshelves, drifting bookshelves, archive management, logistics sorting, license management, vehicle management, intelligent weighing shared bookshelves, micro libraries, distributed libraries, access control attendance, anti-counterfeiting systems, and production process control.

The RFID ultra-high frequency UHF long-distance anti metal asset management tag UT9135 has excellent anti metal properties and high cost-effectiveness. The high-strength packaging can be applied to harsh working environments, and the special design enables long-distance reading capability. The operating frequency is 902-928MHz, UHF EPC Global Class1 Gen2, ISO 18000-6C. Mainly used for management, equipment inspection, building materials management, warehouse management, large outdoor assets, power equipment, and automotive parts management.

The RFID ultra-high frequency tag UT8137 is specifically designed for ultra-high frequency tool management and is specifically developed for multi tag reading scenarios. It is widely used in small metal equipment management, surgical instrument management, mold management, firearm management, and asset management.

The RFID ultra-high frequency white card electronic tag UT2867 adopts a unique tag design and has excellent performance. It can read multiple tags over long distances and is widely used in vehicle management, IoT training, member management, logistics, warehousing, product identification, item anti-counterfeiting, identity recognition and other fields.

RFID high-frequency HZHJ is developed for industries that require strict supervision of important items such as reagents, samples, non-metallic products, accessories, material boxes, etc. Adopting the 13.56MHz high-frequency ISO/IEC15693 protocol HR7768, the intelligent shelf accurately locates items to each layer without the need to shield signals. There is no recognition area outside the shelf, and combined with the backend management system, real-time information of items on the shelf can be viewed. Various statistical reports can also be customized according to customer requirements. Combining identity recognition technology can determine the information of personnel who receive and place items.

Application case: RFID ultra-high frequency card reader UR5206 applied to vehicle weighing management

Application case: RFID ultra-high frequency card reader UR5206 applied to intelligent manufacturing