Introduction to Pulse Signal Digital Display Meter:

Product Introduction:

The international standard chassis is 96 × 48 × 112mm, with a six digit 0.56-inch digital display.

Input 1 and Input 2 form a dual input terminal that can recognize pulse encoder signals with a phase of 90 degrees.

The highest frequency input in China, with a maximum display count frequency of 500K;

Set two control values, two relay outputs, control or alarm.

Four relay output modes are available for selection

Can set automatic delay reset time to achieve automatic delay reset function

Peak display function

Parameter setting password protection function

The current count value and set value will not be lost in case of power failure

The magnification can be set to determine the proportional relationship between the input pulse and the displayed value.

External cable displacement sensor, providing 5V (100mA) and 12V (30mA) voltage to the sensor (other voltages can be customized).

Counting multiplier: Single frequency, double frequency, and quadruple frequency options are available

Differential compensation function

Optional with 485 output;

Optional 4-20mA transmission output;

Technical Parameter

Supply voltage: AC220V 50HZ

Input impedance: 20K

Pulse frequency: ≤ 500K

Magnification range: 0.00~999.999

Display range:- 199999~999999

Pulse level: Low level:- 50V~0.5V high level: 5V~50V

Pulse width: minimum 2uS

Contact capacity: AC220V 3A, DC24V 5A

Installation method: disk mounted card in type

Hole size: 92 × 44mm

Environmental temperature: -10 ℃~+50 ℃