The maximum particle size of potassium sulfate product is 0.45mm, and the minimum particle size is 0.105mm. The mass fraction of wet potassium sulfate water is 6%, and it is dried using a vibrating fluidized bed.

The material enters the machine through the feeding port, and under the action of vibration force, the material is thrown forward continuously in the horizontal direction. The hot air passes through the fluidized bed and exchanges heat with the wet material. The wet air is removed by the cyclone separator and discharged through the exhaust port, while the dry material is discharged through the exhaust port.

1. The vibration source is driven by a vibration motor, which runs smoothly, is easy to maintain, has low noise, and has a long service life.
2. The fluidization is uniform, without dead gaps or blowing through phenomena, which can achieve uniform drying and cooling.
3. Good adjustability and wide adaptability. The thickness of the material layer, the speed of movement inside the machine, and the full amplitude can be infinitely adjusted.
4. It causes minimal damage to the surface of the material and can be used for drying crushed materials; When the material particles are irregular, it does not affect the working effect.
5. Adopting a fully enclosed structure effectively prevents cross infection between materials and air, ensuring a clean working environment.
6. Mechanical efficiency is higher than thermal efficiency, with good energy-saving effect, and can save 30-60% energy compared to general drying devices.

Suitable for chemical, pharmaceutical, food, dehydrated vegetables, grains, minerals, etcDrying and cooling of powdered and granular materials in the industry. For example: citric acid, monosodium glutamate, borax, ammonium sulfate, compound fertilizer, shredded radish, soybean meal, alcohol, seeds, slag, sugar, etc.