VIP member
Pressure immersion testing machine
This device is a water tightness testing equipment designed and manufactured according to the IPX8 requirements of GB4208 "Protection Class of Enclosu
Product details
Brand: Jiubin
model: JB-IPX8
Name: Pressure immersion testing machine
1、 Product Overview:
This device is a water tightness testing equipment designed and manufactured according to the IPX8 requirements of GB4208 "Protection Class of Enclosures (IP Code)" standard. The equipment uses a stainless steel pressure vessel as the test carrier for IPX8 pressure testing. Through a stainless steel multi-stage variable frequency centrifugal water pump and variable frequency pressurization method, the pressure slowly increases and the pressurization range (0.01 MPa-1MPa) can be set arbitrarily. IPX8 continuous diving test; Experimental equipment: The experimental conditions and time shall be in accordance with industry standards Its severity should be higher than IPX7;
Used to test the physical and other related properties of products such as mobile phones, tablets, cameras, LCD TVs, lighting fixtures, electrical cabinets, electrical components, cars, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product is evaluated through calibration to determine whether it meets the requirements, in order to facilitate the design, improvement, calibration, and factory inspection of the product.
2、 Technical parameters:
1. Pressure vessel: Stainless steel
2. Can diameter: 0.8 meters
3. Water level height inside the tank: 1.2 meters
4. Pressure adjustment range: 0.00-0.3Mpa (simulated maximum water depth of 30 meters)
5. Pressure system: air pressure, external air source (user provided)
6. Pressure gauge accuracy: 0.25 level, range: 0.4Mpa
7. Test time: 0-99min
8. Maximum ultimate pressure: 0.4Mpa
9. Pressure protection: pressure switch protection
10. Equipped with staircase steps: used for people to put and retrieve samples
11. Dimensions: 130 * 120 * 1650MM (length, width, height)
3、 Compliant with standards:
Complies with IEC 60529 waterproof test specification IPX8
GB/T2423.38-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test R: Water test method and guidelines
GB5170.20-2005 Basic parameter calibration method for environmental testing equipment for electrical and electronic products Water test
GB4208-2008 Degrees of Protection Provided by Enclosures
Designed and manufactured in accordance with GB7000 and other relevant standards
model: JB-IPX8
Name: Pressure immersion testing machine
1、 Product Overview:
This device is a water tightness testing equipment designed and manufactured according to the IPX8 requirements of GB4208 "Protection Class of Enclosures (IP Code)" standard. The equipment uses a stainless steel pressure vessel as the test carrier for IPX8 pressure testing. Through a stainless steel multi-stage variable frequency centrifugal water pump and variable frequency pressurization method, the pressure slowly increases and the pressurization range (0.01 MPa-1MPa) can be set arbitrarily. IPX8 continuous diving test; Experimental equipment: The experimental conditions and time shall be in accordance with industry standards Its severity should be higher than IPX7;
Used to test the physical and other related properties of products such as mobile phones, tablets, cameras, LCD TVs, lighting fixtures, electrical cabinets, electrical components, cars, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product is evaluated through calibration to determine whether it meets the requirements, in order to facilitate the design, improvement, calibration, and factory inspection of the product.
2、 Technical parameters:
1. Pressure vessel: Stainless steel
2. Can diameter: 0.8 meters
3. Water level height inside the tank: 1.2 meters
4. Pressure adjustment range: 0.00-0.3Mpa (simulated maximum water depth of 30 meters)
5. Pressure system: air pressure, external air source (user provided)
6. Pressure gauge accuracy: 0.25 level, range: 0.4Mpa
7. Test time: 0-99min
8. Maximum ultimate pressure: 0.4Mpa
9. Pressure protection: pressure switch protection
10. Equipped with staircase steps: used for people to put and retrieve samples
11. Dimensions: 130 * 120 * 1650MM (length, width, height)
3、 Compliant with standards:
Complies with IEC 60529 waterproof test specification IPX8
GB/T2423.38-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test R: Water test method and guidelines
GB5170.20-2005 Basic parameter calibration method for environmental testing equipment for electrical and electronic products Water test
GB4208-2008 Degrees of Protection Provided by Enclosures
Designed and manufactured in accordance with GB7000 and other relevant standards
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-