Product Model: DSM-SD-21500B

Working temperature range: RT-300 ℃ Operating voltage: 380V/50Hz Temperature control accuracy: ± 1 ℃ Heating power: 145KW/divided into 16 sets of gear control

Blast power: 750W/380V * 10 sets

Electrical cabinet:Independent electrical cabinet

Specifications and dimensions:

Dimensions inside the heating box:20000×1000×300 Machine conveyor belt space height L x W x H (mm)

Conveyor belt size:21500×900×780 Conveyor belt to ground height L x W x H (mm)

Overall dimensions of the machine:21500×1200×1570 Overall height of the machine (including motor) L x W x H (mm)

Material for box production:

Overview of Machine Structure:This product adopts two side air ducts for air outlet and a middle return air circulation. It uses a plate chain conveyor belt, which is relatively flat and has a feeding section750 mmThe middle heating and drying section is:20000mmThe discharge section behind is:750mmThe heating element is installed in the air duct at the top of the oven, and the circulating motor is installed at the top of the oven to extend the service life of the motor. The inlet and outlet are equipped with stainless steel adjustable door baffles. Installing an adjustable flipping plate can achieve uniform drying thickness and adjustable height at will.

Outer wall material of the box: A3 carbon steel cold rolled plate, sheet metal, bent welding, rivet splicing.

Material of box air plate:High quality stainless steel brushed plate, sheet metal bending, welding, rivet splicing.

Box frame material: A3 carbon steel cold rolled sheet metal bending and welding, filled with high-density aluminum silicate in the middle.

Box tripod material: Made of national standard square tube.

Insulation layer thickness material:100KHigh density aluminum silicate fiber filling(Insulation)The layer thickness is100mm）

Outer box coating material: After rust proof phosphating treatment, the surface is sprayed with plastic in military green color.

Transmission power system:

Transmission power: 1 gear speed regulating motor is used, with a speed range of 0m-20m/min.

Conveyor chain:use2strip1Long distance carbon steel chain. The middle pole is6mmRound steel.

Variable frequency drive: using a variable frequency speed controller.

Conveyor belt:Adopting a baffle type stainless steel roller chain conveyor belt, it is relatively flat and easy to clean. The middle pole is10mmround steel

Intake and exhaust:

Air intake:10Aperture size100mmLocated next to the circulating motor, it serves as a compensating inlet for cold air

Exhaust:Each independent section has a hole diameter of 100mm, located at the top.

Circulating system:

Blowing method: Strong pressure circulating air.

Motor device:10tower750W/380VInstall the long axis motor on the top of the box.

Heating system:

Heating element:Adopting a covered far-infrared heater(SHEATHED HEATER)Dust-free processWType tubular electric heating generator,1KW/Item, overall145Item, total power of heating element145KW，divide10Group heating switch,Continuous service life can reach5Over 10000 hours

Heating time: Heating rate requirement2℃/More than minutes, not exceeding10℃/minute.Heat up from room temperature to60℃, not greater than10minute,Heat up from room temperature to100℃, not greater than20minute.

Electrical configuration:

Temperature Controller:

Control circuit voltage: 220V/50Hz.

Temperature measuring device:10Stainless steel armorPT100Resistance temperature sensing device,10branchKDividing temperature sensing device, precise temperature measurement±1℃.

Protection system: leakage protection, circuit breaker protection, motor overload protection, grounding protection, over temperature protection.

Circuit breaker activation: Circuit breakers with leakage protection are activated to effectively protect all electrical components.

Main control output: Combined with SSR solid-state contactor output, using branded electrical.

Electrical components: Use branded electrical products.

Note: Tunnel ovens (assembly line ovens) are mainly non-standard, and the above cases are for reference only. Detailed requirements need to be discussed before designing more reasonable products. Welcome to call or contact us for detailed communication!