Cross linked cable slicerApplicable to the GB/T2951-2008 standard "General Test Methods for Edge and Sheath Materials of Electric Wires and Cables", it is used for the production of corrugated sheets for mechanical performance testing of polyethylene cross-linked cables. It is also an essential tool for cutting samples for various polyethylene high-voltage cross-linked semiconducting layer micropores and impurities, edge layer micropores and impurities tests at 35000 to 220000 volts, such as GB/12705 and GB/11017.

Briefly describe the operating points of the cross-linked cable slicer:

1. After unpacking the cross-linked cable slicer, check if the equipment is intact. If there is any deformation or damage during transportation, please contact us.

2. Horizontal sampling: (First, use a wrench to remove the bow shaped fixture from the longitudinal fixture)

1) Connect the power supply and turn on the power switch. If the red indicator light is on, it indicates that the power supply is normal. Press the left button to move the cutting blade to the left of the clamp. Take a 300-400mm cross-linked cable sample and place it on the branch rack to level it up. Clamp the clamp tightly.

2) Adjust the height of the cutting tool so that the front baffle of the cross-linked cable slicer tool holder presses down on the sample (adjust the thickness of the sample, effective range of the sample: 0.2mm-2mm). After satisfaction, press the right button and the blade along the axial direction to slice off the sample.

3) If uneven slicing or tail residue is found in the cross-linked cable slicer, please press the left button to repeat slicing or loosen the four screws on the knife holder to adjust the length of the cutting edge of the tool.

3. Longitudinal sampling: First, raise the tool holder and fix the bow shaped fixture on top of the longitudinal fixture, and take a 5-10cm sample vertically; Insert the specimen into the longitudinal fixture and clamp it tightly. The appropriate length for the specimen is 1mm to 2m, and then press the work button to slice off the specimen.

4. When slicing KY4299 cross-linked cable slicer, the blade should be 2mm larger than the bottom surface of the knife holder

5. Do not use the KY4299 cross-linked cable slicer to cut objects to prevent damage to the blade.

Jiangsu Kaiyuan Testing Equipment Co., Ltd. (Jiangdu Kaiyuan Testing Machinery Factory), a manufacturer of cross-linked cable slicing machines, is a professional manufacturer of material testing machines. With years of production experience, strong hardware and software development capabilities, as well as mechanical design and development capabilities, we have a strong team of high-level and mid-level engineering and technical personnel in areas such as automatic control, software programming, mechanical hydraulics, material testing, marketing, production management, electrical testing and assembly. The enterprise has supporting mechanical processing methods such as cars, pliers, milling, grinding, and wire cutting, with excellent technology. The experimental machine has been designed and completed in a "one-stop" manner.

Main products of the company: tensile machines, rubber tensile machines, rubber tensile machine manufacturers, belonging to tensile machines, belonging to tensile machine manufacturers, tensile testing machines, tensile testing machines, safety rope static load tensile testing machines, winding and twisting testing machines, cross-linked cable slicing machines, rubber planing machines, rubber static stiffness testing machines, etc.

Cross linked cable slicer