Oil mist generator

Oil mist aerosol atomizer, abbreviated as oil mist generator, ranges from a minimum concentration of 20mg/h to a maximum concentration of 300g/h
Oil mist is commonly found in the research and quality inspection industry. In the calibration of specific quality inspection and particle measurement equipment, Palas' aerosol generator ensures stable and reliable results under reliable parameter conditions.
In order to conduct practical analysis and comparative experiments, oil mist must be generated from the oil mist raw material, which is consistent with the actual conditions. The raw materials for oil mist include: water, DEHS， Engine oil, paraffin oil, etc. Different raw materials have significant differences in viscosity, surface tension, and density.
Within the PLG system, the independent nozzle system is independently developed and designed by Palas. Based on application requirements, heated nozzles can be selected for certain specific particle size ranges and concentrations. Based on the parameters of the reference raw materials, PLG aerosol generators can be used for cleanrooms, HEPA/ULPA, and leak testing.

Advantages:
Outstanding short-term and long-term dosing stability.
Can be heated.
Optimal particle size distribution and concentration repeatability.
Large flow range (low concentration and high concentration).
Long dose time can be used for automatic filling for several days (optional).
Stable design (optional resistance type and chemical corrosive liquid).
Sturdy and lightweight.
Friendly interface operation, proven to be usable in the industrial field.
Reliable functionality.
Low maintenance.
Reduce operational costs.

Application areas:
Industrial filters/oil-water separators.
Measure filtration efficiency.
Measure the efficiency of graded filtration.
Load testing.
Cooling lubrication separation test
Comparison of Particle Measurement Equipment
Tracer particle
Traffic is visible.

Technical parameters:
Smoke raw materials: According to customer requirements, engine oil, DEHS， paraffin oil
Particle size: 5nm-10um according to customer requirements,
Mass flow rate: According to customer requirements, 20mg/h-300g/h
Flow rate: approximately 2-110L/min
Power supply: 230V, 50Hz