Beijing Huaxin Borun Technology Co., Ltd
Home>Products>Nitrous/Nitrous Nitrogen Analyzer
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    18612378160
  • Address
    Room 765, 6th Floor, Building 15, Xinzhao Jiayuan, Chaoyang District, Beijing
Contact Now
Nitrous/Nitrous Nitrogen Analyzer
3S-UV254-NO2+3 nitrate/nitrite analyzer, using xenon lamp light source, analyzes the concentration of nitrate and nitrite in the measured water qualit
Product details

The 3S-UV254-NO2+3 nitrate/nitrite analyzer uses a xenon lamp light source and ultraviolet absorption method to analyze the concentration of nitrate and nitrite in the measured water quality.

The xenon lamp generates ultraviolet radiation, which is measured by the sample water in the quartz measurement unit. Measure the color of water using Hazen scale or platinum cobalt scale at 350nm with absorbance.

Product Features

  • The instrument adopts a dual compartment housing to ensure complete separation between the electronic components (upper part) and the sampling and analysis components (lower part).

  • The equipment can be set up for automatic calibration, validation, and cleaning, which can reduce downtime and operator intervention,Ensure accurate results.

  • The instrument can use an internal dilution module to expand the detection range of the UV254 analyzer.

  • The principle of UV spectroscopy measurement does not require chemical reagents, and the operation and maintenance costs of the instrument are very low.

  • The ultraviolet light source of the instrument adopts xenon lamp, which has the characteristics of high stability and long service life.

  • The analyzer adopts a color touch screen interface to display measurement values and status information. Easy to access menus and functional interfaces. And supports USB data download.

  • You can choose the dual channel version. By adding an external sequencer, the number of sampling channels can be increased to 4.

  • The instrument undergoes factory testing before leaving the factory. Simply connect the power supply, sample and reagent pipelines, and the analyzer can operate.

Product parameters

Measurement parameters

NO3 /N-NO3 /N-NO2+3

measuring principle

Dual wavelength technology, 220nm measurement, 270nm reference, with matrix compensation.

measuring range

12mm:0-30mg/L NO3

6mm:0-60mg/L NO3

Higher range can be extended to 2-40 times dilution

cycle time

Less than 1 minute, including preparation before the analysis cycle and flushing time after measurement.

water sample

Temperature: 5-50 ℃ Connection interface: 6mm

Flow rate: 80-500mL/min

drainage

No pressure, standard atmospheric pressure drainage

Connection: 12mm (1/2 inch)

thoroughfare

1、 Two belt integrated switching valve

size

604*380*242mm (H*W*D)

weight

20 kilograms (44 pounds)

power supply

110/220V AC 50/60Hz or 24 VDC

Power consumption: MAX80 watts

output

Two 4-20mA analog signals;

One Modbus RTU RS485 digital signal

call the police

4 programmable SPDT potential free relays

digital input

Remote start/stop, start additional cycles, skip idle time, emergency stop

operation temperature

5-45℃(41-113℉)

humidity

10% to 90% non condensing (indoor installation);

Outdoor installation requires the use of protective cabinets or rainproof systems

install

Wall mounted (standard),

Desktop support or panel installation (Option)


Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!