Nanchang harvester prices- Operation method
Harvester is an integrated machinery for harvesting crops, which completes harvesting and threshing in one go, and collects the grains into a storage bin. Then, the grains are transported to a transport vehicle through a conveyor belt. It can also be harvested manually by laying the straw of crops such as rice and wheat in the field, and then using grain harvesting machinery to pick up and thresh them. Crop harvesting machinery for harvesting grains and straw of cereal crops such as rice and wheat. Including harvesters, sun cutters, balers, grain combine harvesters, and grain threshers. When operating the harvester, attention should be paid to:
1. Pre harvest reference: Check if all components of the harvester are intact.
2. Drive the machine into the field, then pull the grass divider to the working position, lower the grain receiving platform, pull the grain discharge gate to the "open" position, hang the grain bag on the hook of the grain receiving bag, and guide the machine to the vertical position of the field ridge.
3. Debugging the machine: Turn the dust adjustment handle to the "standard" position, select the "high speed" or "low speed" position for the auxiliary transmission handle according to the conditions of the crop, and place the grass removal handle in the "cutting" or "grass removal" position.
4. Lower the cutting platform so that the front end of the divider is 5-10cm away from the surface of the field.
5. Pull the disengagement clutch and the clutch lever to the engaged position.
6. Slowly push the main gear lever forward to start harvesting the machine.
7. When the crop begins to enter the threshing port, operate the manual adjustment switch for threshing depth to position the ear head away from the depth indicator mark.
8. After all the crops are harvested, turn the cutting clutch handle to the disengaged position.
9. After the grain outlet stops discharging grain, turn the clutch handle of the thresher to the disengaged position.
10. Check if the switches of each component of the machine are properly turned off.
11. Reduce the throttle and turn off the engine.
12. Drive the harvester back to the storage point for inspection and maintenance.