install

1After moving the machine to the designated area, ensure that it is placed on a level surface or tabletop to ensure a stable and reliable placement of the vegetable cutter.

2The power supply for this machine isAC220V/IPhase.

3Confirm that the adjustable parts and fixed screws of the machine are locked.

4Check that the power supply is connected correctly and the direction of rotation of the cutterhead is correct. The plug has good contact and no looseness.

5Replace the appropriate cutter head, fix it well, and there should be no interference.

6Check if there are any foreign objects inside the rotating drum or on the conveyor belt. If there are any foreign objects, they must be cleaned thoroughly to avoid damaging the cutting tools.

Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

Operation usage

1. Power indicator light: It lights up when the power is connected. It should be noted that the frequency converter is also powered on at this time. Therefore, if the equipment is not in use, the power cord must be disconnected to prevent the frequency converter from heating up when powered on.2Adjust the cutting mode based on the required vegetables to be processed, using a centrifugal slicer for melons and potatoes Slices of hard vegetables can be processed into various shapes such as blocks, cubes, diamonds, etc. of different specifications using a vertical knife.3. To install a vertical knife, first rotate the adjustable eccentric wheel to move the knife holder to the bottom dead center, then lift the knife holder up 1-2 millimeters to make contact with the conveyor belt. Finally, tighten the nut to secure the vertical knife to the knife holder. If the height of the knife holder is too low, vegetables may be cut together. If the height of the knife holder is too high, it may damage the conveyor belt.4. When cutting leafy vegetables, activate the leafy vegetable button to drive the motor to operate the cutting tools. At this time, the rotating double blades operate according to the frequency conversion setting, and the conveyor belt also operates according to the frequency conversion setting.5. Setting the frequency can obtain the desired cutting length.6. Place the object to be cut at the entrance of the green conveyor belt, which will be brought into the lower pressure wheel group and cut by the cutter head.7. When completed, press the leafy vegetable cutting stop button to stop the motor8. When cutting roots and stems, activate the root and stem cutting button to drive the motor to operate the cutting tools. At this time, the aluminum disc double blades operate at a fixed speed9. Place the object to be cut at the feeding port, which will be carried in and cut by the cutter headWhen completed, press the root cutting stop button to stop the motor.